Air pump block-off Plate
HAILERS
Joined: May 2001
Posts: 20,563
Likes: 27
From: FORT WORTH, TEXAS,USA
Hacksaw and drill/drill bit, from HomeDepot and a piece of metal from ??????http://www.onlinemetals.com/ or local. Aluminium. Or http://www.onlinemetals.com/merchant...p=2&top_cat=60
Best if it's 1/8 inch thick at least. Also make it better than the ones from Mazdatrix http://www.mazdatrix.com/c-5.htm and others and install a vacuum nipple on the plate. There are three possible places on the acv blockoff plate to install a nipple. Only three specific places.
There are other places that make those inferior bockoff plates with no nipples for vacuum. Bad products imho.
Best if it's 1/8 inch thick at least. Also make it better than the ones from Mazdatrix http://www.mazdatrix.com/c-5.htm and others and install a vacuum nipple on the plate. There are three possible places on the acv blockoff plate to install a nipple. Only three specific places.
There are other places that make those inferior bockoff plates with no nipples for vacuum. Bad products imho.
Last edited by HAILERS; Aug 11, 2007 at 12:46 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
Mar 28, 2017 03:30 PM
12abridgeport
1st Generation Specific (1979-1985)
2
Aug 17, 2015 06:28 PM