2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Air bag light blinks off and on, 90 vert

Thread Tools
 
Search this Thread
 
Old Mar 3, 2010 | 07:03 PM
  #1  
RXxtraquick7's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jun 2006
Posts: 71
Likes: 0
From: N. California
CA Air bag light blinks off and on, 90 vert

Hello Folks! My 90 vert has the air bag light blinking off and on continously. The engine light is NOT on and I am getting no codes. I have unplugged the battery and reset the ECU but it still occurs. Any ideas on what this might be?

Thanks for the help!

The Dog
Reply
Old Mar 3, 2010 | 11:05 PM
  #2  
fc3s91's Avatar
R.I.P Mark( Icemark )
Tenured Member: 20 Years
iTrader: (23)
 
Joined: Nov 2001
Posts: 3,912
Likes: 1
From: socal
Try to unplug and plug in the orange blue connectors. I have had many verts w/airbags have loose connection. Especially under the hood.
Thanks Robert
Reply
Old Mar 3, 2010 | 11:40 PM
  #3  
willcoop's Avatar
Full Member
Tenured Member 10 Years
iTrader: (4)
 
Joined: Apr 2009
Posts: 121
Likes: 1
From: Washington
They had airbags back in 90?
Reply
Old Mar 4, 2010 | 12:14 AM
  #4  
HOZZMANRX7's Avatar
Driving RX7's since 1979
Tenured Member 20 Years
iTrader: (43)
 
Joined: Aug 2001
Posts: 6,096
Likes: 9
From: So Cal where the OC/LA/SB counties meet
Yep. Only S5 verts without airbags were 1989's.
Reply
Old Mar 4, 2010 | 11:11 AM
  #5  
jjwalker's Avatar
MECP Certified Installer
Tenured Member 05 Years
 
Joined: Feb 2009
Posts: 3,176
Likes: 3
From: Mesquite, TX-DFW
Slightly of topic but....

It amazes me that mazda, to meet federal safety standards in the 90+ vert, installed airbags instead of a roll bar. The freaking miata came with a roll bar but mazda's flagship sports car didn't. Stupid IMHO.
Reply
Old Mar 6, 2010 | 04:23 PM
  #6  
RXxtraquick7's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jun 2006
Posts: 71
Likes: 0
From: N. California
I have tried the connectors, changed the fuse, and still blinking. After I pulled the fuse out and put back in the light for the airbag stayed on, no blinking. When I started it back up, it went back into the blinking mode. It blinks 6 times, then stops for a second, then same again. Any more ideas.

Thanks- The Dog
Reply
Old Mar 6, 2010 | 07:26 PM
  #7  
HotRodMex's Avatar
Senior Member
Tenured Member 15 Years
iTrader: (3)
 
Joined: Sep 2004
Posts: 548
Likes: 0
From: San Luis Obispo, CA
Originally Posted by jjwalker
It amazes me that mazda, to meet federal safety standards in the 90+ vert, installed airbags instead of a roll bar. The freaking miata came with a roll bar but mazda's flagship sports car didn't. Stupid IMHO.
Miatas did not come with a roll bar. I dunno where you got that from.

The standard that needed to be meet was for Supplemental Restraint Systems. Since people weren't buckling their seatbelts, mister GOVT had to step in to save peoples lives somewhow. This began the era of mouse-belts until airbags could be more widely utilized. Addign a roll bar would have done nothing to meet the "safety standards."
Reply
Old Mar 6, 2010 | 08:24 PM
  #8  
Jpk3200's Avatar
Jpk3200
Tenured Member 05 Years
 
Joined: Oct 2006
Posts: 824
Likes: 0
From: San Antonio, TX






From https://www.rx7club.com/2nd-generation-specific-1986-1992-17/airbag-light-flashing-91-vert-199536/
Reply
Old Mar 6, 2010 | 09:36 PM
  #9  
RXxtraquick7's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jun 2006
Posts: 71
Likes: 0
From: N. California
Thanks for that info but what manual is that from? What is the easiest way to fix my problem?
Thanks again!

The Dog
Reply
Old Mar 6, 2010 | 10:12 PM
  #10  
jjwalker's Avatar
MECP Certified Installer
Tenured Member 05 Years
 
Joined: Feb 2009
Posts: 3,176
Likes: 3
From: Mesquite, TX-DFW
Originally Posted by HotRodMex
Miatas did not come with a roll bar. I dunno where you got that from.

The standard that needed to be meet was for Supplemental Restraint Systems. Since people weren't buckling their seatbelts, mister GOVT had to step in to save peoples lives somewhow. This began the era of mouse-belts until airbags could be more widely utilized. Addign a roll bar would have done nothing to meet the "safety standards."
I have worked on many early miata's and they all had factory roll bars.

Maybe my brain is broken.
Reply
Old Mar 6, 2010 | 10:23 PM
  #11  
Jpk3200's Avatar
Jpk3200
Tenured Member 05 Years
 
Joined: Oct 2006
Posts: 824
Likes: 0
From: San Antonio, TX
Originally Posted by RXxtraquick7
Thanks for that info but what manual is that from?
From the Factory Service Manual
Body Electrical Section
You won't find the pages I showed above online. You need the actual book.

Originally Posted by RXxtraquick7
What is the easiest way to fix my problem?
Thanks again!
Go through Steps 1-5 from the photos 2-3 above.
Might want to download the S5 Wiring Diagrams to help better trace wires. You can find them from here ---> http://jared.webhop.net/RX-7/S5%20Wiring%20Diagrams.pdf

It's a slow download. Be patient. My bandwidth sucks.
Reply
Old Mar 6, 2010 | 11:52 PM
  #12  
HOZZMANRX7's Avatar
Driving RX7's since 1979
Tenured Member 20 Years
iTrader: (43)
 
Joined: Aug 2001
Posts: 6,096
Likes: 9
From: So Cal where the OC/LA/SB counties meet
I have this problem as well in both my S5 Verts. After I've been driving the car for about 15 minutes and everything is well warmed up, I've noticed that if I turn the key off and back on the flashing goes away. That makes me think some either some component in the airbag brain is getting weak or, as FC3S91 said, some connection is just barely making contact.
Reply
Old Mar 8, 2010 | 12:20 AM
  #13  
rx7_FREAKKK's Avatar
They live We sleep
iTrader: (1)
 
Joined: Feb 2009
Posts: 919
Likes: 0
From: Dot Island
Originally Posted by jjwalker
I have worked on many early miata's and they all had factory roll bars.

Maybe my brain is broken.
fake roll bars.. They were for looks.. They would not save your life if the car rolled over.. Trust me haaa at least the Car my Uncle has. It was a yellow vert.. the more rare type
Reply
Old Mar 8, 2010 | 08:18 PM
  #14  
HotRodMex's Avatar
Senior Member
Tenured Member 15 Years
iTrader: (3)
 
Joined: Sep 2004
Posts: 548
Likes: 0
From: San Luis Obispo, CA
Originally Posted by jjwalker
I have worked on many early miata's and they all had factory roll bars.

Maybe my brain is broken.
I would rescind my comment and apologize if you could show me ANY proof that an actual, structurally sound roll bar, not a "style bar", ever came stock on a Miata. I would imagine this would be in every options brochure and factory pictorial, if it were true.

OP: apologies for the hijack.
Reply
Old Mar 11, 2010 | 05:24 PM
  #15  
RXxtraquick7's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jun 2006
Posts: 71
Likes: 0
From: N. California
I followed the procedures above in the FSM posted by Jpk3200 and the brake light is no longer on or blinking. Thank you for the post and I appreciate all the help. You da man!

The Dog
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
stickmantijuana
Microtech
30
Apr 23, 2016 06:37 PM




All times are GMT -5. The time now is 10:30 AM.