2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

air this, air that... can someone give me answers?

Thread Tools
 
Search this Thread
 
Old 03-16-07, 10:14 AM
  #1  
Junior Member

Thread Starter
 
RX-7sol's Avatar
 
Join Date: Jul 2006
Location: Lexington, SC
Posts: 31
Likes: 0
Received 0 Likes on 0 Posts
air this, air that... can someone give me answers?

ok i have one butchered 87 T2, the only thing i can see that is left on the intake manifold is the TPS.. i'm trying to figure out exactly what all i will need to be put back on for it to run correctly... and if anyone can send a link to a good write up on the emissions removal.. thats what was supposedly being done, and insted it was a massacre... please help
Old 03-16-07, 12:41 PM
  #2  
HAILERS

 
HAILERS's Avatar
 
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes on 19 Posts
I think if you'll look in the archeives section of this forum, you'll find a emissions removal item. Personally my car is intact so I can't help.

Might help to know IF all the electrical plugs are cut off. Like the small, two socket plugs on the left side of the enigne colored, green, blue, yellow, orange, grey. Are they still there?
Old 03-16-07, 02:16 PM
  #3  
Rotary Enthusiast

iTrader: (1)
 
tandolla's Avatar
 
Join Date: Dec 2005
Location: Everett, WA
Posts: 1,017
Likes: 0
Received 0 Likes on 0 Posts
http://rotaryresurrection.com/2ndgen...s_removal.html

that is another emissions removal site.
Old 03-16-07, 10:56 PM
  #4  
Junior Member

Thread Starter
 
RX-7sol's Avatar
 
Join Date: Jul 2006
Location: Lexington, SC
Posts: 31
Likes: 0
Received 0 Likes on 0 Posts
all the electrical plug-ins are there... sensors and such have been removed...
Old 03-17-07, 12:15 PM
  #5  
HAILERS

 
HAILERS's Avatar
 
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes on 19 Posts
Your mising the vacuum rack which is made up of metal tubing welded together. Actually two assy's of tubing. Jpg's attached might help.
Attached Thumbnails air this, air that... can someone give me answers?-topview.jpg   air this, air that... can someone give me answers?-bottomview.jpg   air this, air that... can someone give me answers?-bottoomview2.jpg   air this, air that... can someone give me answers?-bottomview3.jpg  
Old 03-17-07, 12:24 PM
  #6  
Senior Member

 
redlineracer's Avatar
 
Join Date: Feb 2003
Location: Covington, VA
Posts: 541
Received 0 Likes on 0 Posts
http://forum.teamfc3s.org/showthread...highlight=gold

http://www.nopistons.com/forums/inde...opic=52144&hl=
Old 03-17-07, 12:49 PM
  #7  
HAILERS

 
HAILERS's Avatar
 
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes on 19 Posts
M

Buy the two metal pipe racks and about six feet of vacuum tubing and reinstall it. Use the FSM as a guide.
Attached Thumbnails air this, air that... can someone give me answers?-rackone.jpg   air this, air that... can someone give me answers?-racktwo.jpg   air this, air that... can someone give me answers?-intakemanifold3.jpg   air this, air that... can someone give me answers?-intakemanifold4.jpg  

Last edited by HAILERS; 03-17-07 at 01:13 PM.
Old 03-17-07, 01:21 PM
  #8  
HAILERS

 
HAILERS's Avatar
 
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes on 19 Posts
,
Attached Thumbnails air this, air that... can someone give me answers?-rackfive.jpg  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
wickedrx2
The Bad & Fugly Members
10
06-10-21 06:28 PM
MazdaspeedR1
The Bad & Fugly Businesses
27
05-22-18 05:58 PM
rx7shirley
2nd Generation Specific (1986-1992)
6
09-02-15 02:11 PM



Quick Reply: air this, air that... can someone give me answers?



All times are GMT -5. The time now is 04:10 AM.