2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

aftermarket Transmission and diff.

Thread Tools
 
Search this Thread
 
Old Nov 20, 2001 | 07:23 PM
  #1  
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Nov 2001
Posts: 19
Likes: 0
From: Norcal
Unhappy aftermarket Transmission and diff.

hi,
My tranny is fucked therefor I want a new one are there any 6 speed trannys? or should I just get a new TII. also my diff mount is non existent therefore a disguisting thump happens when I use the gas or not use the gas. are there any good lsds' I could get . thanks alot.
sad panda
Mack
Reply
Old Nov 20, 2001 | 09:58 PM
  #2  
Scott 89t2's Avatar
SOLD THE RX-7!
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 7,451
Likes: 0
From: Vancouver, BC, Canada
no tranny will work unless you pay big money. just try and find a used one.

for the diff just get new front dif mounts. call up www.mazdamotorsports.com I think around $40 but can't remember if that was each or for the pair.
Reply
Old Nov 20, 2001 | 10:28 PM
  #3  
13BAce's Avatar
On a long vacation
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 2,160
Likes: 0
From: Bay Area, CA, U.S.A.
If you want an aftermarket LSD you'll need to take yours apart. RP sells the KAAZ units: http://www.rx7.com/cgi-local/2catalog.cgi?cat=2&part=7 . They also sell gears: http://www.rx7.com/cgi-local/2catalog.cgi?cat=2&part=6.

soul assassin has the HKS transmission, but it's about $7000. You can get a good TII transmission for $2-300. I got one from my friend for free.
Reply
Old Nov 20, 2001 | 10:30 PM
  #4  
13BAce's Avatar
On a long vacation
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 2,160
Likes: 0
From: Bay Area, CA, U.S.A.
If you don't want another rubber differential mount then you can make a mount out of angle iron, but you'll feel some vibrations in your car, and it may get noisy at times. The plus is that it will be very strong and won't break.
Reply




All times are GMT -5. The time now is 09:37 PM.