I bought the arm uego before I found out about the LC-1's simulated narrow band out put . I was wondering about my uego output options . There are two outputs (p3-p4) that emulate a 0-1v output range . P3 is Autronic WB O2 and is not appropriate (opposite in its range.) P4 is Nonlinear Nernst Cell , this one matches the stock ecu input . Would this be acceptable to use in replacement of the original O2 sensor if I plug the output wire in the stock o2 sensor plugin ? Voltage range is .905 for 10 AFR to .07 for 18.5 AFR . 14.75 reads .41v