Advice on rebuild
#1
Junior Member
Thread Starter
Join Date: Mar 2001
Location: Puyallup, Wa, USA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Advice on rebuild
Hey,
ive got a 90 GTU with 93000mi, and a cracked rotor. Would it be advisable to pull the engine and just replace the rotor, seals, etc. or should i just do a full-on rebuild? I want to do it cheap, if possible, but if not, ill just do the whole thing. Any advise??
Thanks,
DRew
ive got a 90 GTU with 93000mi, and a cracked rotor. Would it be advisable to pull the engine and just replace the rotor, seals, etc. or should i just do a full-on rebuild? I want to do it cheap, if possible, but if not, ill just do the whole thing. Any advise??
Thanks,
DRew
#2
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
The phrase cracked rotor is a puzzlement to me but thats not the question soooooo.....None of this is cheap. Just the gasket set runs about 130. I'll stop here and say I'd do the complete rebuild, no ifs ands or butts. Please go to the mazdatrix.com site and look at the prices of what they call a minimal rebuild kit. Also look at the price of rotors, rotor seals(mein gott, four hundred dollars worth of apex seals and thats not counting the side seals etc). Do the rebuild yourself and have some fun. Down load the factory manual at http://www.iluvmyrx7.com for free and see how to do it. Yeah, do the full rebuild.
Thread
Thread Starter
Forum
Replies
Last Post
risingsunroof82
1st Generation Specific (1979-1985)
8
09-07-15 01:11 PM