mxrider914

iTrader: (3)

i searched but couldnt find anything that really helped. my idle was at like 2400 rpm so i tried messin with it one day and it started bouncing and i couldnt rev. the next day it fixed itself somehow but i set the tps anyway. when i set it to 1000 ohms it droped the idle alot but now it bounces between 1300 and 1500 rpm and thats still high to. if i turn the tps so it idles a little higher it idles steady but at like1900 rpm. what else can i try?thanks

zeromage428

My guess is you are not properly setting your tps right.

There is a how-to guide on setting up the tps correctly.

here http://www.fc3spro.com/TECH/HOWTO/TPS/tps.html

N/A is very similary to the pictures that this guide has.

mxrider914

iTrader: (3)

no i did it right at far as i can tell. btw i forgot to say it runs fine now its just the idle. maybe i need to adjust the bac valve? the link you sent me says somethin about that to. ill give it a shot. thanks