2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

add coolant light, and lots of smoke on startup...

Thread Tools
 
Search this Thread
 
Old 10-08-02, 05:22 PM
  #1  
Senior Member

Thread Starter
 
incendui's Avatar
 
Join Date: Dec 2001
Location: Longmont, Co
Posts: 297
Likes: 0
Received 0 Likes on 0 Posts
add coolant light, and lots of smoke on startup...

The add coolant buzzer started going on and off randomly the other day (have plenty of coolant), and now whenever I start my car (even if it still warm) I get a large cloud of smoke. When i shut it off i can hear something gurgling, and my coolant overflow bottle fills up. Does this mean I need a rebuild, and if it does whats the cheapest way to get my car running correctly again?
Old 10-08-02, 05:49 PM
  #2  
Senior Member

 
biorotary's Avatar
 
Join Date: Mar 2002
Location: CA
Posts: 270
Likes: 0
Received 0 Likes on 0 Posts
yep i believe your coolant seals are shot...and the cheapest? um try hypntyz7...
Old 10-08-02, 06:04 PM
  #3  
Full Member

 
joep's Avatar
 
Join Date: Oct 2002
Location: iowa
Posts: 170
Likes: 0
Received 0 Likes on 0 Posts
coolant seals in the actual motor or where> i have the same problem except i dont notice smoke and it shuts off once my motor warms up.
Old 10-08-02, 06:27 PM
  #4  
Senior Member

Thread Starter
 
incendui's Avatar
 
Join Date: Dec 2001
Location: Longmont, Co
Posts: 297
Likes: 0
Received 0 Likes on 0 Posts
is it going to hurt anything if i keep driving it, assuming i never let the temp gauge get too high? also, does the fix in this thread https://www.rx7club.com/forum/showth...threadid=55656 mess things up for when i finally do rebuild it?
Old 10-08-02, 07:35 PM
  #5  
Engine, Not Motor

iTrader: (1)
 
Aaron Cake's Avatar
 
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes on 91 Posts
Your coolant seals are shot, only cure is a rebuild.

Driving the car in this condition is of course not good for the engine, but it's already dead so you might as well drive it anyway...

The "magical fix" DOES work in some cases. Might as well try it...not like your enigne is going to get any deader...
Old 10-08-02, 07:42 PM
  #6  
brap brap

 
Join Date: May 2002
Location: Migrated back to Gulf Breeze, FL
Posts: 121
Likes: 0
Received 0 Likes on 0 Posts
If you consider an engine rebuild, PM me.

But yeah, it sounds like your coolant seals are gone - friend's base model did that 2 weeks ago... and he's getting his rebuilt now...
Old 10-08-02, 07:49 PM
  #7  
Engine, Not Motor

iTrader: (1)
 
Aaron Cake's Avatar
 
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes on 91 Posts
christi: Please adjust the size of your signature. Per forum rules, maxium length is 450 pixels...Thanks.
Old 10-08-02, 07:50 PM
  #8  
Full Member

 
joep's Avatar
 
Join Date: Oct 2002
Location: iowa
Posts: 170
Likes: 0
Received 0 Likes on 0 Posts
anyone think this is my problem? About everytime i start my car, my buzzer goes off. Sometimes my add coolant light come on. They all go off after my engine has warmed up. Think im low? Also when ever i take my car out of gear when im coming to a stop. The rpm drops below and threatens to die.
Old 10-08-02, 07:55 PM
  #9  
Engine, Not Motor

iTrader: (1)
 
Aaron Cake's Avatar
 
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes on 91 Posts
Originally posted by joep
anyone think this is my problem? About everytime i start my car, my buzzer goes off. Sometimes my add coolant light come on. They all go off after my engine has warmed up. Think im low? Also when ever i take my car out of gear when im coming to a stop. The rpm drops below and threatens to die.
Your problem is most likely due to a bad or sticking BAC valve, and an alternator that is about to die...or maybe just a loose connection between alternator and battery. But definitly check that BAC valve.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jutta_J
New Member RX-7 Technical
6
03-25-17 11:24 PM
stickmantijuana
Microtech
30
04-23-16 06:37 PM
gtcd
1st Generation Specific (1979-1985)
30
08-19-15 02:44 AM
pzr2
General Rotary Tech Support
1
08-15-15 08:29 PM



Quick Reply: add coolant light, and lots of smoke on startup...



All times are GMT -5. The time now is 01:20 PM.