2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

ACV Vacume hose configuration help?

Thread Tools
 
Search this Thread
 
Old Aug 31, 2002 | 02:07 PM
  #1  
von's Avatar
von
Thread Starter
Rotary Freak
Tenured Member 05 Years
 
Joined: Dec 2001
Posts: 2,941
Likes: 1
From: sandiego, ca
ACV Vacume hose configuration help?

The bottom of the ACV on my 89GXL has this big opening in it. I dont know what hose used to go on their but its left open and I dont know what to do with it. It doesent go to the Air Pump because those holes are taken.

Hope you guys know what the hell im talking about.
Reply
Old Aug 31, 2002 | 02:22 PM
  #2  
AggieDave's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Nov 2001
Posts: 96
Likes: 0
From: Austin, Texas
ok, if i remember correctly the ACV is the black valve that is on the back of the upper intake. If i am correct then the routing that i had was from the top nipple on te BAC --> the ACV --> stock mount intercooler. But you really dont need this valve. The Jap spec motors dont have one and the jap spec intercoolers dont have any of those nipples on the stock intercooler


dave
87 TII (Series V Conversion)
Reply
Old Aug 31, 2002 | 02:26 PM
  #3  
von's Avatar
von
Thread Starter
Rotary Freak
Tenured Member 05 Years
 
Joined: Dec 2001
Posts: 2,941
Likes: 1
From: sandiego, ca
Woh wait a sec. I dont have a turbo. I have an N/A and the acv is conected to the lower manifold. Thiers a hole that I dont know where it goes to. Not a nipple but a large 1.5 inch hole. Thnx
Reply




All times are GMT -5. The time now is 02:44 AM.