ACV clean up
08-14-14, 06:34 AM
#1
ACV clean up
Is there a write up for opening up an ACV and cleaning it and checking the two sensors.
Ive been searching for some info and have not found much
If not I might post some pics since I am in the process of doing so in my S5 n/a 91 rx7
the springs inside were very stiff and some gaskets were cracked so decided to get some silicone gasket maker
Ive been searching for some info and have not found much
If not I might post some pics since I am in the process of doing so in my S5 n/a 91 rx7
the springs inside were very stiff and some gaskets were cracked so decided to get some silicone gasket maker
08-14-14, 09:35 AM
#2
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,841
Received 2,605 Likes
on
1,848 Posts
no, but its really simple.
08-28-14, 10:44 PM
#3
here are a few pics of my clean up
I made sure there were no rips and clean around it with a bit of sand paper
This gasket was cracked to i had to clean it out and make a gasket for it
I oiled up the springs
Also make sure its not torn
Not much of a write up of how to do it, but i thought i should provide pics for future reference
I made sure there were no rips and clean around it with a bit of sand paper
This gasket was cracked to i had to clean it out and make a gasket for it
I oiled up the springs
Also make sure its not torn
Not much of a write up of how to do it, but i thought i should provide pics for future reference
08-28-14, 11:32 PM
#4
Thread
Thread Starter
Forum
Replies
Last Post