2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

ACT clutch disc wear limits? Worn/Bad?

Thread Tools
 
Search this Thread
 
Old 01-06-04, 07:08 PM
  #1  
Full Member

Thread Starter
 
Cerocool's Avatar
 
Join Date: Jun 2002
Location: Cincinnati Area
Posts: 84
Likes: 0
Received 0 Likes on 0 Posts
Question ACT clutch disc wear limits? Worn/Bad?

This is from an ACT clutch and I need to know what are the wear limits for these types of discs?

Is this one worn? The person I purchased it off of claimed to have only put about 600 miles on the clutch but I think thats an understatement.


Thanks,
Paul
Old 01-06-04, 07:09 PM
  #2  
Full Member

Thread Starter
 
Cerocool's Avatar
 
Join Date: Jun 2002
Location: Cincinnati Area
Posts: 84
Likes: 0
Received 0 Likes on 0 Posts
Old 01-06-04, 07:13 PM
  #3  
mmmtrbo.

 
CRXtoRX7's Avatar
 
Join Date: Aug 2002
Location: SF BAY AREA
Posts: 682
Likes: 0
Received 0 Likes on 0 Posts
oops, double post...
Old 01-06-04, 07:13 PM
  #4  
mmmtrbo.

 
CRXtoRX7's Avatar
 
Join Date: Aug 2002
Location: SF BAY AREA
Posts: 682
Likes: 0
Received 0 Likes on 0 Posts
did you buy this off of a guy named Jarad Leo?
I was supposed to buy one "with 600 miles" from him.
I sent my money on Dec. 10th and the post office took 2.5 weeks to get it to him so he sold it to someone else. He got my money order the day after. If that is it then I am glad you bought it. The only problem is he is supposed to be sending me my money back, and if he was dishonest about the clutch, then who knows if I will ever see my $150...

-Ben
Old 01-06-04, 07:18 PM
  #5  
mmmtrbo.

 
CRXtoRX7's Avatar
 
Join Date: Aug 2002
Location: SF BAY AREA
Posts: 682
Likes: 0
Received 0 Likes on 0 Posts
oh man, that is it. I just looked back at the pictures he sent me... has that same yellow spring...
Old 01-06-04, 07:21 PM
  #6  
Full Member

Thread Starter
 
Cerocool's Avatar
 
Join Date: Jun 2002
Location: Cincinnati Area
Posts: 84
Likes: 0
Received 0 Likes on 0 Posts
Sure was...

Funny coincedence...

He really seemed like an honest guy though. You should get your money back.

-Paul
Old 01-06-04, 07:34 PM
  #7  
mmmtrbo.

 
CRXtoRX7's Avatar
 
Join Date: Aug 2002
Location: SF BAY AREA
Posts: 682
Likes: 0
Received 0 Likes on 0 Posts
yeah, he seemed kind of flaky for a while, not answering emails or calls, but once i finally got a hold of him, he was a pretty good guy. i guess it was good i got jacked on the deal though, that clutch looks pretty used.

good luck with it,
Ben
Old 01-06-04, 08:02 PM
  #8  
fire from MY tailpipe!

iTrader: (5)
 
xfeastonarsex's Avatar
 
Join Date: Jun 2002
Location: Cincinnati, Oh
Posts: 1,204
Likes: 0
Received 1 Like on 1 Post
someones got some splainin to do...
Old 01-06-04, 08:03 PM
  #9  
fire from MY tailpipe!

iTrader: (5)
 
xfeastonarsex's Avatar
 
Join Date: Jun 2002
Location: Cincinnati, Oh
Posts: 1,204
Likes: 0
Received 1 Like on 1 Post
What part of cincinnati are you from, just noticed that... Also it looks worn, Im no expert though...
Old 01-06-04, 10:28 PM
  #10  
Junior Member

 
ACTman's Avatar
 
Join Date: Dec 2003
Location: lancaster, ca
Posts: 47
Likes: 0
Received 1 Like on 1 Post
Re: ACT clutch disc wear limits? Worn/Bad?

Originally posted by Cerocool
This is from an ACT clutch and I need to know what are the wear limits for these types of discs?
Is this one worn? The person I purchased it off of claimed to have only put about 600 miles on the clutch but I think thats an understatement.
Thanks,
Paul
It has a wierd groove on it. Other than that, I would reconsider putting it in if it is thinner than .290" or thicker by .015" toward the center than it is on the outside.
Old 01-06-04, 11:26 PM
  #11  
Full Member

Thread Starter
 
Cerocool's Avatar
 
Join Date: Jun 2002
Location: Cincinnati Area
Posts: 84
Likes: 0
Received 0 Likes on 0 Posts
Well I measured the thickness and its 0.322" which is still in spec but do you really think that this clutch only had 600 miles on it? Unless these discs wear very slowly.

Also, about the groove, its just a smooth spot and is not any lower or higher than the rest of the disc.


-Paul
Old 01-06-04, 11:34 PM
  #12  
Junior Member

 
ACTman's Avatar
 
Join Date: Dec 2003
Location: lancaster, ca
Posts: 47
Likes: 0
Received 1 Like on 1 Post
Originally posted by Cerocool
Well I measured the thickness and its 0.322" which is still in spec but do you really think that this clutch only had 600 miles on it? Unless these discs wear very slowly.

Also, about the groove, its just a smooth spot and is not any lower or higher than the rest of the disc.-Paul
.322 would be relaxed condition. We always measure them collapsed. The marcel (squeeze) of that disc is about .010 so the disc is basically new at around .312. When a disc breaks in it gets a smooth glazed (polished) appearance. It doesn't even look broken in to me from the photo. Good quality discs wear pretty slowly.
Old 01-12-04, 07:34 PM
  #13  
mmmtrbo.

 
CRXtoRX7's Avatar
 
Join Date: Aug 2002
Location: SF BAY AREA
Posts: 682
Likes: 0
Received 0 Likes on 0 Posts
It turns out that the Jarad guy is OK afterall. Just got my full reimbursement back today.

-Ben
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SakeBomb Garage
SakeBomb Garage
9
05-11-20 10:04 AM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
SakeBomb Garage
Group Buy & Product Dev. FD RX-7
8
10-09-15 10:05 PM



Quick Reply: ACT clutch disc wear limits? Worn/Bad?



All times are GMT -5. The time now is 10:22 AM.