Acceleration Cable has alot of "play" Gas pedal Loose? anyone?
Thread Starter
Joined: Jan 2010
Posts: 69
Likes: 0
From: Moreno valley Ca
The acceleration cable that Runs through the firewall has tremendous amount of play and my Gas pedal is almost hitting the floor.
any way fixing this?
any way fixing this?
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
..good stuff.
I was gonna suggest you just wrap it around the shifter..lol!
The car would go like "Be-Jesus" in second gear but de-accelerate when you put it in 1st! :P
(I knew it had a logical explanation though..heh!..good stuff finding the snafu.)
I was gonna suggest you just wrap it around the shifter..lol!
The car would go like "Be-Jesus" in second gear but de-accelerate when you put it in 1st! :P
(I knew it had a logical explanation though..heh!..good stuff finding the snafu.)
I'm having a similar issue right now with my S4 vert. I figure there isn't much point in really digging into it right now since the wiring is effed and the dash is out. My cable is connected and routed correctly though. Does anyone know if there is a good or recommended way to lube the cable? I'm sure mine is from setting outside for the last four years.
Thread Starter
Joined: Jan 2010
Posts: 69
Likes: 0
From: Moreno valley Ca
What happens was I adjusted the throttle cable screw from above counter clockwise and pulled all the extra slack back into the engine area. Now it feels so much better driving
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
Adaptronic 1280s Hot Start 3 Rotor 20b RX7
Monsterbox
Adaptronic Engine Mgmt - AUS
5
Sep 11, 2015 03:29 PM
The1Sun
1st Generation Specific (1979-1985)
0
Sep 7, 2015 10:21 PM



