AC Hose Plugs?
07-05-05, 11:03 PM
#1
Defected to the dark side
Thread Starter
Join Date: Aug 2003
Location: toronto
Posts: 924
Likes: 0
Received 0 Likes
on
0 Posts
AC Hose Plugs?
Ok this is gonna be quick. I've searched but couldn't find mention of this. I'm in the middle of pulling my engine and im removing the entire AC system. My question is, what did you guys use to plug up the hose connections once the AC lines have been completely removed? I'm talking about the locations where the lines screwed into the firewall.
...or do i even need to block these off?
Thanks!
...or do i even need to block these off?
Thanks!
07-05-05, 11:28 PM
#2
D.I.L.U.S.I.
iTrader: (5)
Join Date: Nov 2002
Location: L-Town pa
Posts: 2,051
Likes: 0
Received 0 Likes
on
0 Posts
i didnt block mine off but will be covering the fire wall with heat should to keep the temps down in the car.. but from time to time i get a little exhaust in threw them..
07-05-05, 11:30 PM
#3
Defected to the dark side
Thread Starter
Join Date: Aug 2003
Location: toronto
Posts: 924
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by full-cruise
i didnt block mine off but will be covering the fire wall with heat should to keep the temps down in the car.. but from time to time i get a little exhaust in threw them..
07-05-05, 11:38 PM
#4
Senior Member
Join Date: Jan 2005
Location: Columbus, OH
Posts: 442
Likes: 0
Received 0 Likes
on
0 Posts
Take the glove box out, remove the A/C stuff from inside the car, re-install the box that the A/C stuff was in and then put hole plugs/body plugs in the holes in the firewall
Thread
Thread Starter
Forum
Replies
Last Post
