? about changing a automatic engine to manual?
#1
Junior Member
Thread Starter
Join Date: May 2007
Location: Atlanta,GA
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
? about changing a automatic engine to manual?
Im doing an engine swap to a turbo ll same engine the one im pulling is manual and i bought an automatic turbo ll engine my question is when i put the flywheel on the automatic engine do i have to change the front balance weight ?
#5
Lives on the Forum
iTrader: (7)
No, you just drop in the motor. Period. If you have an aftermarket flywheel, you simply bolt it to the stock REAR counterweight (once you take off the flexplate). If you are using the stock flywheel, you just take off the stock REAR counterweight and put on the stock flywheel. Thats it.
There might be a few differences in the accessories (TB for example), but if you are just using the keg then thats all you need to do.
There might be a few differences in the accessories (TB for example), but if you are just using the keg then thats all you need to do.
Thread
Thread Starter
Forum
Replies
Last Post
ncds_fc
New Member RX-7 Technical
1
08-15-15 10:06 AM