2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

? About A/C removal

Thread Tools
 
Search this Thread
 
Old Jan 20, 2004 | 06:37 AM
  #1  
87turbo2's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 05 Years
 
Joined: Apr 2002
Posts: 768
Likes: 0
From: Jacksonville, Florida
? About A/C removal

I just removed the AC pump and lines from my 88TII yesterday. I had to cut thru the line at the firewall to remove everything. Now this morning I have no heat either. All I get is cold air. WTF!? Any ideas would be appreciated.
Reply
Old Jan 20, 2004 | 10:10 AM
  #2  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
did you short out the air condition compressor clutch wire? Blows the fuse if you did
Reply
Old Jan 20, 2004 | 11:42 AM
  #3  
87turbo2's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 05 Years
 
Joined: Apr 2002
Posts: 768
Likes: 0
From: Jacksonville, Florida
hmmm... Have to check it tonight. 31 degrees this morning and only cold air blowing in didnt feel too great.
Reply
Old Jan 20, 2004 | 12:12 PM
  #4  
jimmyv13's Avatar
Round&Round not Up&Down
Tenured Member 15 Years
 
Joined: Aug 2001
Posts: 2,805
Likes: 0
From: West Bloomfield, MI
I remember when I removed my A/C on my first TII, the linkage came loose where it moves the door for the temperature selection. Can you hear the solenoid when you move the temp selector back and forth? You can get your head under there and see if all of the linkages are still connected.
Reply




All times are GMT -5. The time now is 07:15 PM.