'88 TII needs local mech in Garland, Tx
#1
Full Member
Thread Starter
Join Date: Jul 2002
Location: Garland, Tx
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
'88 TII needs local mech in Garland, Tx
I was just wondering if anyone knows a local mechanic or someone who has extra time to work on my car. I would like to have someone come to my house to do this. I have almost all tools short of a rack, which I might have shortly. I don't have the time to work on it and I want to get it ready to sell.
Here are my problems, feel free to help:
problem#1
The boost sensor doesn't appear to work. I noticed the stock boost gauge was running lower than it should, it runs the same as if you disconnected the boost sensor under the hood. So I decided to test it and purposely disconnected it and the FCD. I ran the car up to 9-10PSI and no fuel cut at all. The car has a To4B on it. I don't think the right amount of fuel is going in either because of the scenario.
problem#2
The right rear wheel bearing is making a noise, this happened after clipping a curb, if you turn the car the noise stops. I just assume something in there needs to be replaced
problem#3
I removed the fog llights and now the headlights don't work. I spent a lot of time going over wiring schematics and replaced most relays w/ no real good results.
So please if anyone thinks they can help fix this and they want to come to Garland, Tx and earn some extra $$$ please let me know.
turbo7@attbi.com
Here are my problems, feel free to help:
problem#1
The boost sensor doesn't appear to work. I noticed the stock boost gauge was running lower than it should, it runs the same as if you disconnected the boost sensor under the hood. So I decided to test it and purposely disconnected it and the FCD. I ran the car up to 9-10PSI and no fuel cut at all. The car has a To4B on it. I don't think the right amount of fuel is going in either because of the scenario.
problem#2
The right rear wheel bearing is making a noise, this happened after clipping a curb, if you turn the car the noise stops. I just assume something in there needs to be replaced
problem#3
I removed the fog llights and now the headlights don't work. I spent a lot of time going over wiring schematics and replaced most relays w/ no real good results.
So please if anyone thinks they can help fix this and they want to come to Garland, Tx and earn some extra $$$ please let me know.
turbo7@attbi.com
#4
I Post In The Nude
Join Date: Feb 2002
Location: College Station
Posts: 1,289
Likes: 0
Received 0 Likes
on
0 Posts
Your probably going to have trouble finding someone especially a well known mechanic to actually come to your house and work on it. If you take it to someone though, take it to Don Marvel in Rowlett of Marvelspeed.
Thread
Thread Starter
Forum
Replies
Last Post
acha3
2nd Generation Specific (1986-1992)
7
09-06-15 08:14 AM