2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

87 na gas gauge problem

Thread Tools
 
Search this Thread
 
Old Sep 4, 2003 | 05:06 PM
  #1  
vizsladog44's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jun 2003
Posts: 54
Likes: 0
From: Ocala,Fl.
87 na gas gauge problem

The gauge on my wifes car is wacky.Jumps from 1/4 to 1/2 a tank all the time.She got scared and went to put gas in it and it only took 6 bucks to fill it up.Is there a way to check it or fix it?
Reply
Old Sep 4, 2003 | 07:22 PM
  #2  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
Float in the tank is probably busted or loose, or the baffles in the tank have rusted out.

You'll want to check out the sender and see
Reply
Old Sep 4, 2003 | 08:08 PM
  #3  
Atticus's Avatar
resU deretsigeR
Tenured Member 05 Years
 
Joined: Mar 2003
Posts: 123
Likes: 0
From: Cincinnati, Ohio
I replaced mine recently (within the last month). Mazda sells them for about $75, and it took me about 30 mins to put in. That's similar to what mine was doing, except mine would just jump from 3/4 to 0.
Reply
Old Oct 4, 2003 | 12:38 PM
  #4  
Psychoblue23's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Oct 2002
Posts: 505
Likes: 0
From: nowhere
My gauge wil read fine when I fill up. But after it gets passed the 3/4 mark it drops all the way to E. So I have to go by the Gas light and or miles. How do I check to see if its the sender? Is it covered in the Haynes book? This seems to be a pretty normal problem, so has anyone done a write up about it? I wanna fix this today or tomorrow, I am trying to sell the car.
Reply
Old Jan 6, 2004 | 06:20 PM
  #5  
razorback's Avatar
You've Been Punk'd
Tenured Member 10 Years
 
Joined: Jun 2002
Posts: 4,727
Likes: 1
From: Branson, Missouri
ok i think my gas guage is messed up. i had a flooding problem last week and i finally got that fixed. so taday i decided to start the car (its really cold outside, wanted to see how it did in cold weather) it started hard at first but i expected that. it starts up to the 3k warm up speed then after 4 or so minutes it just shuts off doesnt sputter or anything it just dies. so i take the plugs out thinking it may be flooded agian and they are dry. the gas guage says half a tank but its said that for the last 4 months (its been at my parents house while ive been away at college) i let it run for 45 minutes the other day after i got it unflooded. and after the gauge still said half a tank. i check the tank and i cant tell if there is any gas or not so we get some anyway just in case. and i just tried and it does the same thing before. whats wrong with it? did it just run out of gas and my gauge is broke? if so how do i test my punp and make sure everything else is working?
Reply
Old Jan 7, 2004 | 12:58 AM
  #6  
razorback's Avatar
You've Been Punk'd
Tenured Member 10 Years
 
Joined: Jun 2002
Posts: 4,727
Likes: 1
From: Branson, Missouri
anyone?
Reply
Old Jan 7, 2004 | 01:06 AM
  #7  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
If it has been really cold (under 32F) and the car was sitting for a while, it is possible that you have water in the tank, which can freeze and block fuel lines.
Reply
Old Jan 7, 2004 | 01:26 AM
  #8  
razorback's Avatar
You've Been Punk'd
Tenured Member 10 Years
 
Joined: Jun 2002
Posts: 4,727
Likes: 1
From: Branson, Missouri
it was started a cople days ago. but not since its been cold (its been like mid 20s in the day and single digits at night. im gonna try again tomorrow.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Tylerx7fb
1st Generation Specific (1979-1985)
39
May 27, 2019 12:45 PM
Rotospectre
New Member RX-7 Technical
3
Mar 28, 2018 03:33 PM
Snoopy FD
Build Threads
25
Dec 8, 2015 01:45 PM
gtcd
1st Generation Specific (1979-1985)
30
Aug 19, 2015 02:44 AM




All times are GMT -5. The time now is 05:06 PM.