'87-88 AFM position
03-24-02, 03:04 AM
#1
Senior Member
Thread Starter
Join Date: Dec 2001
Location: WEST
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
'87-88 AFM position
Has anyone tried different AFM positions for the '87-88?
Someone on the list said level and 1/4 turn counterclock worked.
Anyone else?
I think the problem I have is the AFM . As of now, the AFM inlet side is turned downward about 20 degrees because of the piping for the front mount. After checking everything for the hesitation problem above 7psi, the AFM position might be a culprit.
Someone on the list said level and 1/4 turn counterclock worked.
Anyone else?
I think the problem I have is the AFM . As of now, the AFM inlet side is turned downward about 20 degrees because of the piping for the front mount. After checking everything for the hesitation problem above 7psi, the AFM position might be a culprit.
Last edited by IWNTA20B; 03-24-02 at 03:06 AM.
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
10-07-15 08:12 PM