I was wondering if anybody on the forem has used these injectors, and if they would work on my 88 turboII as secondaries. (im splitting em with a friend)



http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWA%3AIT

 

bump

 

help me

 

I think you'd be better off using 2 larger secondary injectors instead. It would be cheaper and provide better injector control at low RPMs.

so you'd have : 1000cc in the primaries and 550's in the seocondaries. I have no idea if that is enough fuel for your application, but it would give you about the same total fuel flow. 1000cc injectors for 100 each at marren fuel injection.

edit: and the marren jap styles will fit.

 

other way

550cc primary
1000cc secondary

 

eh... yea... I know I said that first... brain fart :P

 

hes not gonna put all four injectors, betwen me and him are gonna buy them im gonna have 2 and hes gonna have two that why hes asking if they fit or somebody have try them before

 

yeah, as eddierotary said, we both have rx7's with turbo2 motors(hi is a gsl-se, mine an 88turbo). We are splitting the cost of the 4 injectors so we will each have 2 to put in out secondaries. Were just trying to find out if these particular ones will fit.

Thanks

 

bump---back to the top!!!!

 

You cannot just slap on large injectors without something to control them.
It's going to run VERY RICH after 3800 rpm. Most likely it'll bog when it gets there.

 

I just want to know if they will fit from someone that has use the same ones. But thanks for the input.

 

anybody used these?