5th and 6th port actuators taped open?
12-04-05, 11:09 PM
#1
Full Member
Thread Starter
iTrader: (3)
Join Date: Sep 2005
Location: Newnan GA
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
5th and 6th port actuators taped open?
My 91 NA just doesn't seem taht powerful. I don't know of any other rx's in the area to run against so i don't know if this is the speed it is supposed to perform at. I think i heard that there are only about 5 total in the surrounding counties. Anyway, to get to the point.....
I read on the forums that there could be a problem with the 5th and 6th port actuators, i went out to put grease on them to test if it they moved under hard driving.(the actuators move, the grease smears) but there is this stuff that looks (and feels) to be white masking tape wrapped around the actuator rods towards the top. any help?
I read on the forums that there could be a problem with the 5th and 6th port actuators, i went out to put grease on them to test if it they moved under hard driving.(the actuators move, the grease smears) but there is this stuff that looks (and feels) to be white masking tape wrapped around the actuator rods towards the top. any help?
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM
mulcryant
2nd Generation Specific (1986-1992)
10
09-09-15 05:24 PM
