2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

5/6th Actuator gaskets + Autozone = ?

Thread Tools
 
Search this Thread
 
Old Nov 10, 2002 | 02:52 PM
  #1  
StukThrtl's Avatar
Thread Starter
Junior Member
Tenured Member 10 Years
 
Joined: Aug 2001
Posts: 37
Likes: 0
From: Memphis
5/6th Actuator gaskets + Autozone = ?

Hey guys.. gonna fix my actuators today and went by the advance autoparts, but they could not find the gaskets. I was wondering if you can get the gaskets at autozone and what they would be listed under if anyone knows.

Thanks
Shawn
Reply
Old Nov 10, 2002 | 02:56 PM
  #2  
nashman69g's Avatar
Boost Addict
Tenured Member 20 Years
iTrader: (3)
 
Joined: Nov 2001
Posts: 1,898
Likes: 13
From: Metairie, LA near new orleans
try NAPA or MAZDA or if u don't want to do that just get some gasket material for AUTOZONE and make your own!!
Reply
Old Nov 10, 2002 | 03:04 PM
  #3  
Aaron Cake's Avatar
Engine, Not Motor
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
You won't fine these anywhere but Mazda. Or Mazdatrix (http://www.mazdatrix.com). If you really want, you can buy gasket material and make them yourself.
Reply
Old Nov 10, 2002 | 03:12 PM
  #4  
StukThrtl's Avatar
Thread Starter
Junior Member
Tenured Member 10 Years
 
Joined: Aug 2001
Posts: 37
Likes: 0
From: Memphis
Also, does the gasket seal anything? Or are the actuators 2 peice?
Reply
Old Nov 10, 2002 | 03:13 PM
  #5  
StukThrtl's Avatar
Thread Starter
Junior Member
Tenured Member 10 Years
 
Joined: Aug 2001
Posts: 37
Likes: 0
From: Memphis
Originally posted by Aaron Cake
You won't fine these anywhere but Mazda. Or Mazdatrix (http://www.mazdatrix.com). If you really want, you can buy gasket material and make them yourself.
Thanks Aaron!
Reply
Old Nov 10, 2002 | 03:16 PM
  #6  
Aaron Cake's Avatar
Engine, Not Motor
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
The gasket seals between the actuator and the lower intake.
Reply
Old Nov 10, 2002 | 05:17 PM
  #7  
silverrotor's Avatar
Moderator
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Mar 2002
Posts: 7,592
Likes: 5
From: Toronto, Corporate Canada
I agree. In fact, I used RTV Silicone for mine. Didn't have the slightest desire to get new ones. I had to scrap off the old ones. Be sure not to plug up the air Inlets!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
matty
3rd Generation Specific (1993-2002)
40
Oct 6, 2015 09:13 PM
Turblown
Single Turbo RX-7's
1
Sep 30, 2015 05:58 PM




All times are GMT -5. The time now is 10:55 AM.