4.3 rear ends on JDMs
09-30-04, 11:13 PM
#1
Senior Member
Thread Starter
Join Date: Jun 2004
Location: no where
Posts: 319
Likes: 0
Received 0 Likes
on
0 Posts
4.3 rear ends on JDMs
OK i know that the USDM GTUs are the ONLY model of FC3s that have the 4.3 rear end i know that. (I have a GTUs) But i was wondering do the JDM gtx turbo model have a 4.3 rear end. I have a chance to get a hold of a half cut with FULL drive train.
SO do JDM turbo 13bt motors have 4.3 rear ends?
Black GTUs "BLACK AND GOLD BABY"
PS here is a picture of my baby.
SO do JDM turbo 13bt motors have 4.3 rear ends?
Black GTUs "BLACK AND GOLD BABY"
PS here is a picture of my baby.
09-30-04, 11:27 PM
#3
Senior Member
Thread Starter
Join Date: Jun 2004
Location: no where
Posts: 319
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RotaryResurrection
Only the rare infini models did. Odds are you aren't getting one of those, so I believe it'd have the standard 4.1.
Ic Then, Another question then,
Are the GTUs as stong as the T2 drivetrain?
09-30-04, 11:34 PM
#4
A GTUs drivetrain is identical to any other nonturbo (which there were none of in japan, btw) except for 5th gear ratio in the trans, and the rearend gear ratio. Size adn compatibility of all the parts is the same. IT's nothing special, really. Slightly more fun than the average coupe, but not special.
from an ex-GTUs owner.
But to answer your question, everything on a nonturbo from the flywheel back is smaller and weaker than a turbo model. So no, it is not as strong.
from an ex-GTUs owner.
But to answer your question, everything on a nonturbo from the flywheel back is smaller and weaker than a turbo model. So no, it is not as strong.
09-30-04, 11:39 PM
#5
Is it running yet?
Join Date: Jan 2003
Location: Cincinnati, Ohio
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by k1n0y
Ic Then, Another question then,
Are the GTUs as stong as the T2 drivetrain?
Are the GTUs as stong as the T2 drivetrain?
No, it'll break before a TII rear diff. will. If you've got money to burn you can always get the TII 4.3 ring and pinion set from Mazdatrix.
http://www.mazdatrix.com/g7.htm
Last edited by Lodivigo; 09-30-04 at 11:42 PM.
Thread
Thread Starter
Forum
Replies
Last Post