3rd gen intake fit on 2nd gen?
01-03-05, 01:15 PM
#3
Locust of the apocalypse
Join Date: Apr 2003
Location: Directly above the center of the earth (York, PA)
Posts: 2,553
Likes: 0
Received 1 Like
on
1 Post
They (FEED) make an adapter plate to fit the third Gen UIM to the S5 LIM.... if you have an s4 (86-88) your SOL because the runners are WAY different sized and it would just screw stuff up even if you did make an adapter.
Plus... There are a lof of other modifications that must be done in order you use an FD manifold on an S5 LIM in a second gen...
I had one ready to go with my haltech swap and ditched the idea because, even though i was running the haltech, the difference in the runners would have made for some weid airflow patterns, and possivly a venturi effect at the adapter..
Plus... There are a lof of other modifications that must be done in order you use an FD manifold on an S5 LIM in a second gen...
I had one ready to go with my haltech swap and ditched the idea because, even though i was running the haltech, the difference in the runners would have made for some weid airflow patterns, and possivly a venturi effect at the adapter..
