350z Wheels?
#2
Free Candy
Join Date: May 2003
Location: Charlotte, NC
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
tires may be a little too tall, but the wheels should fit well.
to check and see if the tires are going to work go to www.miata.net/garage/tirecalc.html
plug your stock tire size, then the tire size on the 350z wheels and it will tell you how off the overall diameter is. keep it under 10%-15% and you should be fine. just remember that the higher % that the overall diameter differs is how 'off' your speedometer will be.
to check and see if the tires are going to work go to www.miata.net/garage/tirecalc.html
plug your stock tire size, then the tire size on the 350z wheels and it will tell you how off the overall diameter is. keep it under 10%-15% and you should be fine. just remember that the higher % that the overall diameter differs is how 'off' your speedometer will be.
#3
Lives on the Forum
The proper size would be 225/40/18. One thing to check is the hub bore, but the FC has a pretty small one, so you're most likely ok, but make sure it's more than 56.9mm (IIRC, check to be sure).
Trending Topics
#9
Lives on the Forum
That's the minimum size that the hole in the center of the wheels needs to be, there's a lip on the hubs and if the center bore on the Nissan wheels is smaller than that then the wheels won't seat onto the hubs and you won't be able to use them without having the wheels machined.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM