300hp?
#26
Full Member
Thread Starter
I couldn't do the intercooler?
#27
Rotorhead
Join Date: Feb 2001
Location: Charlottesville, Virginia, USA
Posts: 9,136
Likes: 0
Received 39 Likes
on
33 Posts
You could, but if your upgraded turbo doesn't have the same dimensions then you may need to get a modified pipe, a front-mounted intercooler may require an upgraded radiator, and if the intercooler adds a significant amount of power then the engine may run lean without the fuel and ECU upgrades.
#28
Full Member
Thread Starter
You could, but if your upgraded turbo doesn't have the same dimensions then you may need to get a modified pipe, a front-mounted intercooler may require an upgraded radiator, and if the intercooler adds a significant amount of power then the engine may run lean without the fuel and ECU upgrades.
#30
Full Member
Thread Starter
#31
Rotorhead
Join Date: Feb 2001
Location: Charlottesville, Virginia, USA
Posts: 9,136
Likes: 0
Received 39 Likes
on
33 Posts
#32
Full Member
Thread Starter
#33
Full Member
Thread Starter
I know the minimum injector size needed is 720cc but could I go to 750cc if need be? Just to open a few more options as I'm having a hard time finding 720cc injectors
#34
Rotorhead
Join Date: Feb 2001
Location: Charlottesville, Virginia, USA
Posts: 9,136
Likes: 0
Received 39 Likes
on
33 Posts
Yes, as long as the fuel injectors have the correct dimensions, plug type, and impedance. If you want to make sure that you don't screw it up, just contact one of the vendors on this forum because they know what fits your engine.
Yes, you can use 750cc fuel injectors. Actually, a fuel injector that is rated at 750cc/min @ 43.5psi has just about the same theoretical output as a fuel injector that is rated at 720cc/min @ 40psi if your fuel rail pressure is 40psi in both cases.
#36
Full Member
Thread Starter
Yeah, everyone's been more than helpful I know a little bit about boost creep, but what are you saying? You think I might get some with the setup people are suggesting? What could I do to combat it? Bigger wastegate? More free flowing exhaust? I have Racing Beat's TII turbo back exhaust and could take off the pre-silencer if need be
Thread
Thread Starter
Forum
Replies
Last Post
WestJaxVert
Rotary Car Performance
4
05-13-04 09:40 PM