2nd Gen. Need Fc Wheel Tire Guhru !!
#1
Full Member
Thread Starter
Join Date: Oct 2002
Location: Erie,pa 16503
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
2nd Gen. Need Fc Wheel Tire Guhru !!
HELP .. ANY FC - 2ND GENERATION MOTORHEADS
I WANT TO PUT SOME ADR 17" X 7" WHEELS WITH A : 45 OFFSET, AND SOME FREE 17" X 215 X : 50 TIRES , ON MY 1990 RX7 GXL COUPE .. ANY RUB OR WIDTH HEIGHT FITMENT PROBLEMS ? OR IS THIS SETUP A GO ..
ONLY DRIVE THIS SLEEPER ON THE WEEKENDS ECT ..
ANY REPLY & HELP WOULD BE APPRECIATED
I WANT TO PUT SOME ADR 17" X 7" WHEELS WITH A : 45 OFFSET, AND SOME FREE 17" X 215 X : 50 TIRES , ON MY 1990 RX7 GXL COUPE .. ANY RUB OR WIDTH HEIGHT FITMENT PROBLEMS ? OR IS THIS SETUP A GO ..
ONLY DRIVE THIS SLEEPER ON THE WEEKENDS ECT ..
ANY REPLY & HELP WOULD BE APPRECIATED
#2
Eats, Sleeps, Dreams Rotary
iTrader: (1)
Well, as the rim width is the same as a stock 16" wheel, the wheel will be 5mm (.20") closer to the strut. But as your going to use a 215-50x17 (-.8" Dunlop and only a -.3" Pirelli, section width less than a 225-50x16). I'd say it could work. Mighty close depending on the make of the tire. The worst case, a minimal spacer may be needed on the front.
Thread
Thread Starter
Forum
Replies
Last Post