255 LPH fuel pump (Wiring question)
08-12-07, 07:43 AM
#1
255 LPH fuel pump (Wiring question)
I am in the process of doing a Tii swap into my N/A, and just finished the fuel pump. This is my interpretation of how the fuel pump should be connected. If I am wrong, please let me know ASAP.
1. Dissconnected the assembly out of the tank.
2. Removed the positive and negative wires on the existing fuel pump.
3. Remove the fuel pump and filter at the end.
4. The new pump came with a clip to connect and dissconnect. I attached the positive wire of the new pump to where the positive wire from the existing was attached. I then attached the negative wire from the new pump to where the negative wire of the existing was attached.
5. I then put the assembly back into the tank and reattached it.
Is this correct, for those of you who have done this? Thanks.
CHRIS
1. Dissconnected the assembly out of the tank.
2. Removed the positive and negative wires on the existing fuel pump.
3. Remove the fuel pump and filter at the end.
4. The new pump came with a clip to connect and dissconnect. I attached the positive wire of the new pump to where the positive wire from the existing was attached. I then attached the negative wire from the new pump to where the negative wire of the existing was attached.
5. I then put the assembly back into the tank and reattached it.
Is this correct, for those of you who have done this? Thanks.
CHRIS
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
befarrer
Microtech
3
08-22-15 05:52 PM