I just bought some 2003 bucket celica seats to put in my fc. They look really nice, but they dont bolt up really nice, a few holes are off. Would it be possible just to drill in some new hols into the floorboard to get them to fit? Or is there a better idea?

 

cant you bend stuff on the seat instead of drilling into the car?

 

No do drill your car use your stock rails and drill thoose to line up with the holes on the bottom of the celica seats

 

only 1 can really be bent on each seat to line up, the front left one, I have already dont that, but about the others... they are in totally different postions.

 

If you drill make sure you keep in mind the location of brake and fuel lines running under the car.

James

 

you cannot simply drill the stock brackets to fit onto the celica seats? cause that is what most people have to do to get aftermarket seats to fit in.

 

the brackets on the celica seat are totally built in to the seats themselves. I have tried to get them off, but it doesnt work.

Where would the brake lines and such be?

 

Basicly, they run under the floor boards on the drives side. Look under the car to find them.

James