1989 GTU P/S Bracket Question
11-29-19, 05:50 PM
#1
Junior Member
Thread Starter
1989 GTU P/S Bracket Question
Does anyone know how to take the Power Steering bracket off, so I can replace the Power Steering? I could use some help and advice for replacing the Power Steering Pump.🙏
Last edited by mazdaverx713b; 12-01-19 at 06:23 AM.
11-30-19, 04:29 AM
#2
Rotary Freak
There is 4 bolts holding p/steering pump on to mount. 3 at front behind the belt pully. U have to remove belt and pulley to get to them. and 1 bolt at rear of pump at bottom of oil reservoir tank
11-30-19, 08:44 AM
#3
Senior Member
The bracket can stay put. Like previous poster stated, it comes out pretty easy. You can find copies of the Factory Service Manual at either Foxed.ca, or Rotaryheads.com. The factory manuals for these cars are really good. It covers a lot of the normal repair items. Replacing pump should be a piece of cake with the manual, keep us updated if you have any questions!
Thread
Thread Starter
Forum
Replies
Last Post
d20180
3rd Generation Specific (1993-2002)
9
04-09-04 12:07 AM
cbrock
2nd Generation Specific (1986-1992)
4
02-11-02 09:27 PM