2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

1988 RX7 FC 13b

Thread Tools
 
Search this Thread
 
Old Apr 20, 2017 | 08:29 PM
  #1  
TannerScooter's Avatar
Thread Starter
Can Post Only in New Member Section
 
Joined: Apr 2017
Posts: 2
Likes: 0
From: AUSTIN
1988 RX7 FC 13b

Just recently bought this car knowing its going to be a fixer upper, the issue im having right now is, the engine seems to be getting too hot. I just recently did a coolant flush and replaced the lower radiator cap, but the car still gets too hot. Both the upper and lower hoses get hot telling me it isn't the thermostat. Tomorrow i will be doing another coolant flush but this time draining and filling from the top cap instead of the cap on the radiator. So my question is if properly flushing tomorrow doesn't fix the issue of over heating then what would my next steps be?
Reply
Old Apr 20, 2017 | 11:29 PM
  #2  
Nightimewanderer's Avatar
abandoned
 
Joined: Apr 2015
Posts: 16
Likes: 0
From: Earth
has the coolant reservoir been bubbling up?
Reply
Old Apr 20, 2017 | 11:40 PM
  #3  
TannerScooter's Avatar
Thread Starter
Can Post Only in New Member Section
 
Joined: Apr 2017
Posts: 2
Likes: 0
From: AUSTIN
Yes the coolant reservoir has been bubbling up
Reply
Old Apr 20, 2017 | 11:49 PM
  #4  
Nightimewanderer's Avatar
abandoned
 
Joined: Apr 2015
Posts: 16
Likes: 0
From: Earth
You might have a blown coolant seal or just a plugged radiator
Reply




All times are GMT -5. The time now is 01:42 PM.