Hello, I'm sure I already created a thread about this. But I can't find it anymore so I'll just start another one. Ever since I dropped a new to me rotary in my 86 Sport and gotten it running I've had the warning system beeping at me. Three beeps then a pause... Ignition on or engine running it beeps, and it's driving me nuts, there is nothing on this site or with a google search that gives me any insight on what to look at. Hoping a guru can give me something to look for.

Here is a video I took of the car running so you can hear the beeping...

http://vid88.photobucket.com/albums/...psi2krh9x0.mp4

Also I did find this on rx7club.com that gives some info, but I've looked over my engine harness. Cannot find any broken or shorting out wires. Also the car starts right up, runs and drives just fine. Has power through all the revs without any hesitation, so I don't know if my coils are the culprit.



Anything I need to be looking at? With the previous engine it did not make this noise at all. Also there is NO POWER STEERING IN THIS CAR! Never had it, manual rack and pinion so it's not the power steering ECU going off.