ok so i have a 91 fc w/13b and i was just wondering if it was possable to just add on a turbo? is there space? or do i have to do a swap? if possable what are the drawbacks?
in advance for those of you with helpful advise thanks... for the rest of you... bring it on...

 

I dont usually say this, but there are tons of threads on this. Its been done with many posts. Do a few searches and you will find tons of info. Good luck

 

Search for the NA to turbo right up...a lot of people will tell you its better to just buy a 4-port turbo motor because even if you want to turbo your 6 port you got a lot of mods to make and you can barely run any boost so the best idea is to just buy a turbo motor from another S5 or a JDM S5.

 

Quoted from the FAQ:

Can I swap a Turbo engine/Jspec engine/13BT/etc into my Non Turbo?
Yes, check these links:
https://www.rx7club.com/forum/showth...threadid=26647
http://www.rotaryresurrection.com/ro...conversion.htm


What Turbo kits can I add onto my non turbo RX-7?
There are no longer kits formally made at the time of this post, however there are companies from time to time that do make available non turbo to Turbo Kits. Because most of these companies stop building the kits, or go out of business in short time, it is impossible to keep active links for them.

Most people that turbo a non turbo make their own kits:
Using the stock TII turbo, exhaust manifold with spacer, NA intakes and NA ECU:
http://www.aaroncake.net/rx-7/naturbo.htm
https://www.rx7club.com/forum/showth...threadid=88540

https://www.rx7club.com/forum/showth...threadid=88758
https://www.rx7club.com/forum/showth...hreadid=124232
http://users2.ev1.net/~ccoutts/turbo..._a_project.htm

Using the stock TII turbo, exhaust manifold, intakes, ECU:
http://forum.teamfc3s.org/showthread.php?t=37694

Turbo-NA Forum:
http://www.aaroncake.net/forum/forum...urbocharged+NA