2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

1 fast question

Thread Tools
 
Search this Thread
 
Old 04-25-03, 07:18 PM
  #1  
Full Member

Thread Starter
 
Join Date: Jan 2003
Location: kamloops b.c
Posts: 124
Likes: 0
Received 0 Likes on 0 Posts
1 fast question

i just took out my oil cooler lines and now forget which went where.

does the long one goes from the back of the block to which oil cooler hole? the uppe or lower?
is the long line the inlet to the oil cooler or the outlet to the oil cooler?


and is the short one go to the top of the oil cooler of the bottom?

thnaks !! haha sorry for the stupid question
Old 04-25-03, 07:38 PM
  #2  
Junior Member

 
maxrotor's Avatar
 
Join Date: Mar 2003
Location: San Diego
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
Back hose to the bottom of the cooler. Front hose to the lower
Old 04-25-03, 07:39 PM
  #3  
Junior Member

 
maxrotor's Avatar
 
Join Date: Mar 2003
Location: San Diego
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
Front hose to the upper, Sorry It's friday
Old 04-25-03, 07:44 PM
  #4  
Full Member

Thread Starter
 
Join Date: Jan 2003
Location: kamloops b.c
Posts: 124
Likes: 0
Received 0 Likes on 0 Posts
thanks alot man
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
_Tones_
Adaptronic Engine Mgmt - AUS
10
05-25-21 05:37 AM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM



Quick Reply: 1 fast question



All times are GMT -5. The time now is 08:48 PM.