0% air flow reading?......
Thread Starter
Full Member
Joined: May 2002
Posts: 106
Likes: 0
From: Tampa, FL
0% air flow reading?......
when my car is on and idleing, the s-afc air flow reading is at 0%. smell lots of gas. can any one help please. i got the tps volt to 9.850 and the tps % at 0%. flap, arrow up and right, 5in 5out. i still cant get the hi and lo thrtl % by rpm settings, so can one of you turbo owners let me know what you got them set at. also need help with the thrtl % (defaulted at 10% lo and 50% hi). dec./air setting would help out alot too.
(I USED SEARCH BUT CANT FIND ANYTHING THAT HELPS)
thanks
(I USED SEARCH BUT CANT FIND ANYTHING THAT HELPS)
thanks
Well, sounds to me like you have the S-AFC wired up wrong, or your AFM is messed up.
You mean the tps volt is at .98 right?? NOT 9.8??
If you have an 86-88 TII, your low throttle should be about 97 and hi should be 99.
Too bad, those TPS's aren't good.
Check Saabguy's recent posts about using a second TPS for the S-AFC.
There is no reason why it should be reding 0%.... what about when you are driving?? Does it move then?
If not- you have it wired incorrectly...
You mean the tps volt is at .98 right?? NOT 9.8??
If you have an 86-88 TII, your low throttle should be about 97 and hi should be 99.
Too bad, those TPS's aren't good.
Check Saabguy's recent posts about using a second TPS for the S-AFC.
There is no reason why it should be reding 0%.... what about when you are driving?? Does it move then?
If not- you have it wired incorrectly...
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
Mar 28, 2017 03:30 PM
yetter227
2nd Generation Specific (1986-1992)
20
Sep 5, 2015 11:57 PM



