%^&#* dash pod
#1
accept no imitations™
Thread Starter
Join Date: Mar 2001
Location: san francisco
Posts: 2,096
Likes: 0
Received 0 Likes
on
0 Posts
%^&#* dash pod
I finally get my car out of the impound (long story) and the speedo doesn't work (again) so I took the dash apart to plug the speed cable back in, and now the rest of the gauges don't work.. crap.
tach/temp/etc.. gas seems to work.
The car is parked in a dark garage at work, so I don't have much light to work with, but everything looks like it is connected properly.. oh well, I'm just venting mostly, gonna check it out later on..
tach/temp/etc.. gas seems to work.
The car is parked in a dark garage at work, so I don't have much light to work with, but everything looks like it is connected properly.. oh well, I'm just venting mostly, gonna check it out later on..
#2
accept no imitations™
Thread Starter
Join Date: Mar 2001
Location: san francisco
Posts: 2,096
Likes: 0
Received 0 Likes
on
0 Posts
So I checked it out again, pulled it out again, checked the connections, and all is fine.. I got the Speedo to work again.. but the tach and everything to the left of it doesn't work anymore.. do the two other plugs on the back come off easily? I can't seem to figure out what to press to pull them off.
Has anyone encountered this before?
Has anyone encountered this before?
#4
accept no imitations™
Thread Starter
Join Date: Mar 2001
Location: san francisco
Posts: 2,096
Likes: 0
Received 0 Likes
on
0 Posts
ok.. I solved the problem, the METER 10A fuse was busted.. damn all this frustration for a stupid problem.. hahah
oh, and I'll post my impound story after I get all the facts straight...
oh, and I'll post my impound story after I get all the facts straight...
Thread
Thread Starter
Forum
Replies
Last Post