if you have pulled you front fenders, and have pics, please post here. thank you

 

Here are mine pulled in the front.

 

hope this helps. the driver side messed up a lil due to the steering moving **** sucked but they came out ok. hope u

 

Sorry not the best photos and not major pull but enough

 

Pulled and flared fronts worked for a while, but not enough room for uptravel with wide tires. Burned off some paint in the pictures lol

 

Looks sick but you get a nasty dent when the wheel hit the fender hard

 

I know this is an old thread but did you guys use a fender roller to pull them out like that or did you guys use another method cause I need to do this just not sure as to how it was done ?

 

i used a fender roller.

 

My rears I used a roller but the fronts we just used a wadded up news paper and a torch cuz we couldn't get a hold of a roller that day. Worked pretty well actually. Just lift the car up, jam paper between tire and fender, lower car and it'll self clearance almost. Give it a bit of a tug to help along the pull but it's not a bad way to go if you're without a fender roller.

 

I just used a hammer... They always come out clean

 

did the same thing don't have any pics tho. came out good aside from all the paint i destroyed because i was too lazy to pick up my heat gun from work but i don't really care. use a rubber hammer and heat gun if you don't want the paint to chip.

 

looks sooo good!

 

**** doc for wadded up paper and fire that looks clean as hell . Makes me wanna go back to stock fenders