project panda 7
08-27-08, 07:36 PM
#26
Accepting TII funds
Join Date: Aug 2005
Location: OR
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
To the OP, good luck with this new look. I also agree with your opinions as the S4 trim seems to look better on our cars. And yes, the S5 front bumper's bottom half looks better than an S4. Cool little conversion. I can't wait to see your car cleaned up and finished.
08-27-08, 09:53 PM
#29
probably could have modded the s5 front bumper by filling in the molding line, then masking off\make a guide and use a dremel to replicate the s4 moldings.
that half cut bumper is crazie idea tho never seen anyone do it.. Ive seen people do that to fenders tho *bolt a fender on top of a fender lol
that half cut bumper is crazie idea tho never seen anyone do it.. Ive seen people do that to fenders tho *bolt a fender on top of a fender lol
08-28-08, 12:17 AM
#30
Full Member
Thread Starter
Join Date: Jul 2008
Location: new mexico
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
probably could have modded the s5 front bumper by filling in the molding line, then masking off\make a guide and use a dremel to replicate the s4 moldings.
that half cut bumper is crazie idea tho never seen anyone do it.. Ive seen people do that to fenders tho *bolt a fender on top of a fender lol
that half cut bumper is crazie idea tho never seen anyone do it.. Ive seen people do that to fenders tho *bolt a fender on top of a fender lol
08-31-08, 04:11 PM
#32
Full Member
Thread Starter
Join Date: Jul 2008
Location: new mexico
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
well did some work on the car and started painting the thing. just testing some things out. finally bught a new paint gun so should get the paint and spray/prep the rest of the car next weekend. also started the motor tear down and pulled the turbo. got the wheels to a satisfactory state and mounted.
here are the wheels freshly stripped and painted.
and on the car
here are some other random pics from this weekend with a refresh on the front lip
me and some friends pulling the turbo
and a comparison of the turbo to a stock STI VF39 turbo
and here is the wife. the car will be hers when the subaru is done being built
and one last one with the engine bay open before cleaning up for the day
MORE TO COME NEXT WEEKEND!!!
here are the wheels freshly stripped and painted.
and on the car
here are some other random pics from this weekend with a refresh on the front lip
me and some friends pulling the turbo
and a comparison of the turbo to a stock STI VF39 turbo
and here is the wife. the car will be hers when the subaru is done being built
and one last one with the engine bay open before cleaning up for the day
MORE TO COME NEXT WEEKEND!!!
08-31-08, 06:02 PM
#35
Wow, dude... I must say, I approve! 
The bastardized bumper looks pretty sweet to me. I assume you're going to do a proper paint job when everything's said and done? And the wheels, I'd like 'em better black with a polished lip, but those are nice!
p.s. I think your car will need a spoiler when it's done; preferably a stock turbo spoiler.
The bastardized bumper looks pretty sweet to me. I assume you're going to do a proper paint job when everything's said and done? And the wheels, I'd like 'em better black with a polished lip, but those are nice! p.s. I think your car will need a spoiler when it's done; preferably a stock turbo spoiler.
08-31-08, 09:05 PM
#39
Full Member
Thread Starter
Join Date: Jul 2008
Location: new mexico
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
haha thanks for the compliment on my wife.
yes there will be a more proper paint on the car when its done. i will be sanding filling and spraying this week and next weekend along with a nice clear coat and wet sand and buffing when its all said and done.
the wheels may be replaced with some gram light 57 pros in white. but thats a big maybe at this point sine the guy is local and pending them fitting and me liking them. they are 17" wheels and i personally like a smaller wheel like 16". hence the 16" on my subaru and the 16" watanabe's you see there. i actually had 17" wheels on the subaru and sold and opted for 16"
here is the subaru which will be stripped apart and have a fresh motor.
17" advan rcII
and 16" BBS
the lense is a fish eye in most the shots with a nice 1.8 Fstop and the rest are a basic kit lense 18 - 55.
yes there will be a more proper paint on the car when its done. i will be sanding filling and spraying this week and next weekend along with a nice clear coat and wet sand and buffing when its all said and done.
the wheels may be replaced with some gram light 57 pros in white. but thats a big maybe at this point sine the guy is local and pending them fitting and me liking them. they are 17" wheels and i personally like a smaller wheel like 16". hence the 16" on my subaru and the 16" watanabe's you see there. i actually had 17" wheels on the subaru and sold and opted for 16"
here is the subaru which will be stripped apart and have a fresh motor.
17" advan rcII
and 16" BBS
the lense is a fish eye in most the shots with a nice 1.8 Fstop and the rest are a basic kit lense 18 - 55.
09-01-08, 05:11 AM
#42
They call me - Hybrid!
Join Date: Jun 2008
Location: Austin/Round Rock
Posts: 565
Likes: 0
Received 0 Likes
on
0 Posts
all i got to say it your damn cool!! you like subies and sevens just like me! 
the whole s4.5 bumper is a sick idea, im with you on s4 body but s5 front bumper cause it looks better.
good luck on the project and i hope all goes well with the GC, and what kind of gc is it? 2.5 or an L?? and what engine?
the whole s4.5 bumper is a sick idea, im with you on s4 body but s5 front bumper cause it looks better.
good luck on the project and i hope all goes well with the GC, and what kind of gc is it? 2.5 or an L?? and what engine?
09-01-08, 10:58 AM
#43
Full Member
Thread Starter
Join Date: Jul 2008
Location: new mexico
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
it is a 2000 impreza 2.5 rs. stock color is sedona ridge pearl. it currently has the 2.5 liter motor but is going to be swapped with an 03 wrx motor but will be modified and tuned for about 320hp, the car weighs in at around 2700lbs and im keeping the stock transmission due to the gearing being 4.11.
09-01-08, 10:59 AM
#44
Full Member
Thread Starter
Join Date: Jul 2008
Location: new mexico
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
i had a question for everyone. what side skirts do you think would fit/flow with the car the best. i am thinking stock turbo II side skirts but is there anything else you would recommend?
09-01-08, 01:15 PM
#47
They call me - Hybrid!
Join Date: Jun 2008
Location: Austin/Round Rock
Posts: 565
Likes: 0
Received 0 Likes
on
0 Posts
it is a 2000 impreza 2.5 rs. stock color is sedona ridge pearl. it currently has the 2.5 liter motor but is going to be swapped with an 03 wrx motor but will be modified and tuned for about 320hp, the car weighs in at around 2700lbs and im keeping the stock transmission due to the gearing being 4.11.
09-01-08, 02:18 PM
#48
Smoke' em
Join Date: Jul 2008
Location: SAN DIEGO
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
im jealous you have a nicest gen of the subbys and you have a rx7 =[ and i think the 16's fit the subbie better imo +1 on the turbo II sideskirts gl with the ongoing projects
09-01-08, 03:52 PM
#49
It's Sedona Red Pearl... probably the best Subaru color... My DD is a SRP WRX.
Welcome to the SRP brotherhood, looks like a sick project and I'm totally diggin' the gold wheels. The seven is going to look great too when finished off. Keep us updated on both!
Not trying to hijack your thread but here's mine:
Welcome to the SRP brotherhood, looks like a sick project and I'm totally diggin' the gold wheels. The seven is going to look great too when finished off. Keep us updated on both!
Not trying to hijack your thread but here's mine: