Pictures of FC wheel fitment with specs... ***Picts-n-Specs ONLY***
01-18-09, 02:03 PM
#153
In The Twisties
11-22-10, 02:43 PM
#155
Junior Member
Join Date: Sep 2010
Location: Bakersfield
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Here is a link to a DIY: http://forums.evolutionm.net/showthread.php?t=209244
You can use a tool like this:
11-26-10, 10:39 AM
#162
Junior Member
Join Date: Aug 2010
Location: Abq
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Its an eastwood fender roller with a tirerack sticker on it. Also If your car is to low it will not fit and you'll have to raise the suspension to fit it or roll using different methods. Fc's dont run into this issue but many other cars do
18x9.5+5 r and 8.5+15 front
[IMG]<a href="http://www.flickr.com/photos/woooeric/5208837611/" title="s4 by woooeric, on Flickr"><img src="http://farm5.static.flickr.com/4084/5208837611_e6fdbacabd.jpg" width="500" height="375" alt="s4" /></a>[/IMG]
18x9.5+5 r and 8.5+15 front
[IMG]<a href="http://www.flickr.com/photos/woooeric/5208837611/" title="s4 by woooeric, on Flickr"><img src="http://farm5.static.flickr.com/4084/5208837611_e6fdbacabd.jpg" width="500" height="375" alt="s4" /></a>[/IMG]
11-26-10, 09:29 PM
#164
I
iTrader: (3)
Join Date: Nov 2007
Location: at home
Posts: 1,063
Likes: 0
Received 0 Likes
on
0 Posts
Its an eastwood fender roller with a tirerack sticker on it. Also If your car is to low it will not fit and you'll have to raise the suspension to fit it or roll using different methods. Fc's dont run into this issue but many other cars do
18x9.5+5 r and 8.5+15 front
[IMG]<a href="http://www.flickr.com/photos/woooeric/5208837611/" title="s4 by woooeric, on Flickr"><img src="http://farm5.static.flickr.com/4084/5208837611_e6fdbacabd.jpg" width="500" height="375" alt="s4" /></a>[/IMG]
18x9.5+5 r and 8.5+15 front
[IMG]<a href="http://www.flickr.com/photos/woooeric/5208837611/" title="s4 by woooeric, on Flickr"><img src="http://farm5.static.flickr.com/4084/5208837611_e6fdbacabd.jpg" width="500" height="375" alt="s4" /></a>[/IMG]
11-26-10, 10:54 PM
#165
Junior Member
Join Date: Aug 2010
Location: Abq
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Haha the hood probably but I got the lip off a volvo wagon at u pull it. I need to get about ten more as this one is about done.
Edit: Just realized this is probably tony so for sure the hood lol
Edit: Just realized this is probably tony so for sure the hood lol
11-28-10, 04:57 PM
#167
Not Even Foo
iTrader: (13)
Join Date: Oct 2006
Location: South Bay, CA
Posts: 8,999
Likes: 0
Received 0 Likes
on
0 Posts
15x7 ~+4 / 15x8 ~-7; 205/50's all around.
(offsets are approximate calculations since there are no stamps inside the wheel. but it's for sure single digit positive in the front and single digit negative offset in the rear).
(offsets are approximate calculations since there are no stamps inside the wheel. but it's for sure single digit positive in the front and single digit negative offset in the rear).
i still want a set of Equips with those specs one day. 
11-29-10, 02:45 PM
#175
Brap Brap Psshh
![Tyler [S5 FC]'s Avatar](https://www.rx7club.com/customavatars/avatar115591_1.gif){kind=avatar}
Join Date: Apr 2008
Location: Colorado Springs
Posts: 1,669
Likes: 0
Received 0 Likes
on
0 Posts
It took a while to find the right ones, but am definitely glad I waited til I found the sizes I wanted. They look so epic in person, at least I think they do, haha. Nothin too flashy, just perfect.
