I have 17x9 +24 now on stock fenders the.front is a 205/40 and the rear is a 215/40 and.it doesn't rub

 

Are the 9's not as deep as the 9's then?

 

What?^

 

Sorry quick fingers + iPhone = mistakes. I meant are the 9's not as 'deep dished' as the 8's then? Due to the difference in offset.

 

Dude with the right offset and tire size you can fit a 10 with front stock fenders

 

Ok, here are the official specs on these wheels:

16x7 +18
16x8 +18
16x8 -10
16x9 0

The 16x8 -10 and the 16x9 -0 were both designed to sit flush with the rear fender on the Starquest, so the distance from the hub to the lip is the same (from what I understand, I could be completely wrong, I'm very tired).

 

And now it all makes sence

 

Just got these wheels today. 16x8 offset -10. The rears stick out a lil and the fronts hit the caliper. What size spacers will work without it rubbing the front fender?

And saavedro88 how did u get such a stance/camber in the rear?

 

I think a 10mm spacer will do it up front

 

Are you running 16x8 on the front as well? 10mm should clear it but I think you'll need some arch pulling.

 

16x8 all around, ok thx guys will look for some spacers and post pics

 

16x8 -10 and you're rubbing on the caliper? I would have thought that would have been fine. I'm running a 2 inch spacer on my front wheels, cause I have the +18's up front, and the spacer puts them perfectly flush.

Lol. Nothing. Literally. When you lower an FC this much, that's what you get. I actually have too much camber honestly, I need to get adjustable camber links so I can try to get the wheels a little bit more flush with the fender...

 

^^ cool I put 8mm spacer on it but my studs are too short to put lug nuts on the wheels so I got to get hubcentric spacers. My 7 has kyb agx struts with tanabe springs and it gives it a nice stance. Thx for the input guys, hope to post pics soon

 

Ok so I finally got 5mm in the front but it seems to stick out farther than the rears, thinking about getting 16x7 up front. Anyone wanna trade 2 rims? Lol will post pics up soon

 

Just get a spacer for the rear too?

 

 

 

Nice tires. Likin' the meat. Lots of poke though...

 

TThinking on getting fender flares to make it flush or get smaller tires up front

 

Fender flares would be dope as ****. DO it.

 

^^
https://www.rx7club.com/2nd-generation-non-technical-pictures-198/flared-fc-bolt-flares-opinions-847803/page2/

 

Yes.

 

How are the front on full lock? Are you on stock ride height?

 

Kyb agx struts with tanabe springs so no on stock height.

 

What are you fronts? Are they the -10 or the other ones?
Rears -10 too?