my fc on google street view
#1
rotary tech
Thread Starter
iTrader: (9)
Join Date: Jan 2007
Location: tracy/stockton ca
Posts: 795
Likes: 0
Received 0 Likes
on
0 Posts
my fc on google street view
so i have been sorta down since i crashed my seven. since i lost my frp front bumper and its a pick n pull special now. but i was on google maps the other day and started playing with street view. i typed in my address and it has a picture of my seven before i crashed it. in its primer white days.
check it out
http://maps.google.com/maps?q=540+me...num=1&ct=title
you have to hit street view and carry the little figure over to the a. other wise you end up somewhere else.
check it out
http://maps.google.com/maps?q=540+me...num=1&ct=title
you have to hit street view and carry the little figure over to the a. other wise you end up somewhere else.
Trending Topics
#8
rotary tech
Thread Starter
iTrader: (9)
Join Date: Jan 2007
Location: tracy/stockton ca
Posts: 795
Likes: 0
Received 0 Likes
on
0 Posts
nah i never did the swap and i have decided not to do it since a 350 doesn't really belong in the fc. im just doing an na build for road course.
allslownoshow- i don't really care if people on here see where i live my fc is in storage somewhere else.
allslownoshow- i don't really care if people on here see where i live my fc is in storage somewhere else.
#11
rotary tech
Thread Starter
iTrader: (9)
Join Date: Jan 2007
Location: tracy/stockton ca
Posts: 795
Likes: 0
Received 0 Likes
on
0 Posts
yeah i will once its done i have decided im not going to do a little here take it out then break something. then fix it and do a little more somewhere else then break something else. i figure get it all done take it out and break it all haha. nah but i want it to be done not half way there ya know.
#14
Will drive for parts
iTrader: (4)
yeah i will once its done i have decided im not going to do a little here take it out then break something. then fix it and do a little more somewhere else then break something else. i figure get it all done take it out and break it all haha. nah but i want it to be done not half way there ya know.
#18
rotary tech
Thread Starter
iTrader: (9)
Join Date: Jan 2007
Location: tracy/stockton ca
Posts: 795
Likes: 0
Received 0 Likes
on
0 Posts
just to ease everyones mind the headlights have actually been fixed since then. i still have the controller installed and rarely set them at sleepy eyes. that picture was from a long time ago before i did my five lug swap and before i got my 91 coupe wheels. heres a picture now but its depressing
<a href="http://s268.photobucket.com/albums/jj33/mswit209/?action=view¤t=myelenor001.jpg" target="_blank"><img src="http://i268.photobucket.com/albums/jj33/mswit209/myelenor001.jpg" border="0" alt="Photobucket"></a>
<a href="http://s268.photobucket.com/albums/jj33/mswit209/?action=view¤t=myelenor003.jpg" target="_blank"><img src="http://i268.photobucket.com/albums/jj33/mswit209/myelenor003.jpg" border="0" alt="Photobucket"></a>
no i can seriously say dtss kills (well trys to anywayz) thats how i crashed im fairley sure. i was coming through a mountain road and coming into a turn. i had barely started turning when out of now were my *** end becomes my front end. i froze because i was staring at a 150ft+ drop cliff. and i hit a hill behind me. my *** end came off the ground about four feet and the impact spun me around which tore off my front bumper.
<a href="http://s268.photobucket.com/albums/jj33/mswit209/?action=view¤t=myelenor001.jpg" target="_blank"><img src="http://i268.photobucket.com/albums/jj33/mswit209/myelenor001.jpg" border="0" alt="Photobucket"></a>
<a href="http://s268.photobucket.com/albums/jj33/mswit209/?action=view¤t=myelenor003.jpg" target="_blank"><img src="http://i268.photobucket.com/albums/jj33/mswit209/myelenor003.jpg" border="0" alt="Photobucket"></a>
no i can seriously say dtss kills (well trys to anywayz) thats how i crashed im fairley sure. i was coming through a mountain road and coming into a turn. i had barely started turning when out of now were my *** end becomes my front end. i froze because i was staring at a 150ft+ drop cliff. and i hit a hill behind me. my *** end came off the ground about four feet and the impact spun me around which tore off my front bumper.
#19
rotary tech
Thread Starter
iTrader: (9)
Join Date: Jan 2007
Location: tracy/stockton ca
Posts: 795
Likes: 0
Received 0 Likes
on
0 Posts
im thinking rtek 2.0 to start my tuning experience. 550 pri 720 secs. stay with the porting i have now unless my motor pops then its a huge street port. i have a manual rack rb headers s5 body parts and some other things sitting around waiting for the build. my car is in patterson right now and its going to be on its way to sac here soon. thats what im worried about is that when i try to move it the motors going to give out from sitting so long. but then that gives me a reason for a rebuild and my porting. i have kyb agxs on it with rb springs. but want coilovers. im going to strip it cage it and track it. so it is definitely going to have a track look. im going to get the plexiglass kit from grannys speed shop for it. and im going to be getting some motegi tracklites or trakelite 2s. this is all in do time. however. i am just gaining parts because i want to do a close gear ratio swap on the trans and then a miata torsen diff. the diff will be easy because its cheap. but the trans gear set is roughly 2500-3000 dollars so thats going to be one of the last things done. and it doesn't have to be done for me to take it out. its more off a want right then a need.
#20
Will drive for parts
iTrader: (4)
You could save some bucks by doing a Miata gearbox swap....
https://www.rx7club.com/2nd-gen-archive-72/miata-transmission-into-na-fc-results-524587/
Patterson FTL! I used to live there.
https://www.rx7club.com/2nd-gen-archive-72/miata-transmission-into-na-fc-results-524587/
Patterson FTL! I used to live there.
#21
rotary tech
Thread Starter
iTrader: (9)
Join Date: Jan 2007
Location: tracy/stockton ca
Posts: 795
Likes: 0
Received 0 Likes
on
0 Posts
You could save some bucks by doing a Miata gearbox swap....
https://www.rx7club.com/showthread.php?t=524587
Patterson FTL! I used to live there.
https://www.rx7club.com/showthread.php?t=524587
Patterson FTL! I used to live there.