looking 4 picts of 19 or 18 inch rims on fc3s
search results gave me nothing,
if you have picts and specs on 19 or 18 inch rims on an fc can you post em? (widebodied or not) ....PLEASE |
search the wheel/tire/suspension forum next time.
0 for not searching! peace |
https://www.rx7club.com/suspension-wheels-tires-brakes-20/
post here or that FC official wheel fitment thread. you might as well throw some DUBS if you're 1 inch away from it.:wallbash: anyway, good luck and use that link to your advantage. |
imo wheels those sizes = fail
and not a little fail but a big fail, like this http://i190.photobucket.com/albums/z...%20pics/m3.jpg |
lol, thx everybody... im glad to know their are still haters out their
.... and big thx to boostins5 who seems to be the only one with brass https://www.rx7club.com/showpost.php...postcount=2404 |
lol, sorry for the hating its just my opinion, hope u didnt take it to heart
|
since when are we nice to noobs? dude, i got blasted my first couple of postings, dont trip, for reals.
and from now on, search the different forums, its all right there, you just have to take 30 seconds to look around. peace |
here you go..... my 18" wheels
specs 18x7.5 38 offset 2.25" lip front 18x9.5 35 offset 3.25" lip rear http://i133.photobucket.com/albums/q...9/DSC03262.jpg http://i133.photobucket.com/albums/q...9/mywheels.jpg http://i133.photobucket.com/albums/q...s69/Viper1.jpg http://i133.photobucket.com/albums/q...9/DSC05328.jpg |
love the orange, but not the orange with the gold!
|
Originally Posted by vipers
(Post 7424777)
here you go..... my 18" wheels
specs 18x7.5 38 offset 2.25" lip front 18x9.5 35 offset 3.25" lip rear ...with some more help i can figure out the best bippu fitments ...now i know theirs more around here somwhere... |
thanks for the compliments.... but sadly, the car is no more....... R.I.P......
you can fit 9.5's up front but you need coilovers and the right offset.... if i were to just try and swap the rear to the front, it would hit the spring perch..... and the car was in a few magazines;) |
Lancer traitor!! :soapbox:
:rofl: :lol: :lol2: |
boo to the evo BOO! :)
|
Nice colour but ew to the spoiler.
|
Heres mine
18x9.5 rear ET 30 18x8.5 front ET 35 Plus 25mm spacers http://i88.photobucket.com/albums/k1...inis/Clean.jpg |
Originally Posted by vipers
(Post 7426098)
thanks for the compliments.... but sadly, the car is no more....... R.I.P......
you can fit 9.5's up front but you need coilovers and the right offset.... if i were to just try and swap the rear to the front, it would hit the spring perch..... and the car was in a few magazines;) ah... so you gonna paint the evo or somethin(deep dishin evo, eh... eh)? |
Originally Posted by Beezy
(Post 7426150)
Heres mine
18x9.5 rear ET 30 18x8.5 front ET 35 Plus 25mm spacers |
Rip
Originally Posted by vipers
(Post 7426098)
thanks for the compliments.... but sadly, the car is no more....... R.I.P......
|
Originally Posted by platinumpresto
(Post 7424701)
lol, thx everybody... im glad to know their are still haters out their
.... and big thx to boostins5 who seems to be the only one with brass https://www.rx7club.com/showpost.php...postcount=2404 |
|
Size? Offsets?
|
18x7.5 +24 215/35/18 federal ss595
|
Originally Posted by LeeTheSlacker
(Post 7426297)
18x7.5 +24 215/35/18 federal ss595
..photoshop anybody |
i hate red.
:( |
those wheels look pretty sick on a FC! Too bad the only 7.5:(
|
Yeah, JTP knows his stuff. I'm planning on 18's or 19's with 30mm fenders front and back. Ima gonna watch this one. ;)
|
Zenneti aluminum wheels with Falken ZE512 235/45/z18 8.5 front 265/45/z18 9.5 rear with 25mm spacers up front. Stance GR coilovers. A little bit of rubbing when turning too sharp, but otherwise fit fine.
http://img.photobucket.com/albums/v6...7/MYDC0168.jpg http://img.photobucket.com/albums/v6...7/MYDC0164.jpg http://img.photobucket.com/albums/v6...7/MYDC0167.jpg |
Originally Posted by demontwig
(Post 7426509)
Zenneti aluminum wheels with Falken ZE512 235/45/z18 8.5 front 265/45/z18 9.5 rear with 25mm spacers up front. Stance GR coilovers. A little bit of rubbing when turning too sharp, but otherwise fit fine.
|
Originally Posted by LeeTheSlacker
(Post 7426371)
i hate red.
:( |
Originally Posted by platinumpresto
(Post 7426696)
:icon_tup: nice... you gotta little micro stretch going on their in the rear. could use some spacers in the rear and a 1"drop ... when i first saw this i thought they were 17s!!!
Stretch...you mean that thing under the rear trim piece? I know. If not that, elaborate? :) and I don't know if I want to drop it anymore, the coilevers dropped it a fair amount already; I think the pic makes it look like it sits higher than it does. |
I think the big wheels don't look bad, but not at the cost of the stretched rubber.. I don't mind rubber thats flat with the wheel, and I prefer a little overhang, but stretched rubber smaller than the wheel just looks out of place.
Now, the reason for the stretched rubber is clearance, correct? |
18's on stock body looks goofy.
18's need aero and low. lots of low. and flush. like so. https://i58.photobucket.com/albums/g...ing/rx7065.jpg or like so. http://www.dorimon.com/fc3s/fc00042.jpg http://www.dorimon.com/fc3s/fc00043.jpg someone buy my 18's. |
Originally Posted by demontwig
(Post 7426901)
Stretch...you mean that thing under the rear trim piece? I know. If not that, elaborate? :) and I don't know if I want to drop it anymore, the coilevers dropped it a fair amount already; I think the pic makes it look like it sits higher than it does.
I.E.- you have 265/45/18 on a 9.5 a good stretch would be 235-245/45-55(depending on sidewall compound)/18 picts.. modern stretch - https://img244.imageshack.us/img244/...3111586xx6.jpg https://img.photobucket.com/albums/v...JDMPBEFORE.jpg insane stretch - https://i92.photobucket.com/albums/l...conv001614.jpg https://img.photobucket.com/albums/v...mikessr121.jpg |
Originally Posted by LeeTheSlacker
(Post 7426974)
18's on stock body looks goofy.
18's need aero and low. lots of low. and flush. like so. or like so. http://www.dorimon.com/fc3s/fc00043.jpg someone buy my 18's. |
whyd you quote the one picture?
i dont own either of those cars, jsut shwoing you. i was referring to the 300c wheels. |
|
|
hey vipers what are your rims
|
4 Attachment(s)
here are some pics of my vert, Motegi touge 18X7.5 in the front and 18X9 in the rear
|
hers mine, 18 inch at italia flash's:
http://i136.photobucket.com/albums/q...y/DCFC0421.jpg http://i136.photobucket.com/albums/q...y/DCFC0422.jpg http://i136.photobucket.com/albums/q...y/DCFC0420.jpg http://i136.photobucket.com/albums/q...y/DCFC0418.jpg http://i136.photobucket.com/albums/q...y/DCFC0417.jpg |
|
Everyone whines about ricers... haha.. You all drive a f***** japanese rice-cooker with a 1.3L turbo engine! :rlaugh:
Anyway.. I dont think 18" rims looks too bad on a stock car. Here is my car with unknown brand 18x9.. and i think the offset 35mm so im running 25mm spacers on all four wheels :) I havnt lowered it enaugh yet and the camber in front isnt correct either.. http://i8.photobucket.com/albums/a10...g?t=1191865636 |
Originally Posted by Sindregutt
(Post 7427626)
Everyone whines about ricers... haha.. You all drive a f***** japanese rice-cooker with a 1.3L turbo engine! :rlaugh:
Anyway.. I dont think 18" rims looks too bad on a stock car. Here is my car with unknown brand 18x9.. and i think the offset 35mm so im running 25mm spacers on all four wheels :) I havnt lowered it enaugh yet and the camber in front isnt correct either.. http://i8.photobucket.com/albums/a10...g?t=1191865636 |
yea i love the look of 18 on it...makes the car. couldnt load pic but my car is my avater and there 225/35/18..+45 which is no good. gotta take off rear hubs and press longer studs to put spacer but front are flush..i got the tanabe gf210 on apexi adjustables.. i can take more if ya want
|
^^ i know what you mean. i have to roll my front fenders.
|
I dont like the look of rolled fenders on the FC.. Boostinmys5 got some really nice rear fenders, and he says that they are rolled, but i dont belive him haha. Dont understand how he can get a so nice and sharp edge without doing more than just rolling..
|
Originally Posted by rotorhead_izzy
(Post 7427369)
hers mine, 18 inch at italia flash's:
Originally Posted by Sindregutt
...:
wow, great setups.. but you guys are starting to scare me... its like you cant tuck your front in with your current setups... but then again most of you have spacers
Originally Posted by t24todd
(Post 7427653)
yea i love the look of 18 on it...makes the car. couldnt load pic but my car is my avater and there 225/35/18..+45 which is no good. gotta take off rear hubs and press longer studs to put spacer but front are flush..i got the tanabe gf210 on apexi adjustables.. i can take more if ya want
...avatars dont count, but i can imagine... ok no i cant... i needz picts |
i do have spacers on the car because the rims came off of an fd, when i say roll the fenders i mean just get rid of the sharp lip on the inner fender to keep a stock look to the fender.
|
Originally Posted by rotorhead_izzy
(Post 7427695)
i do have spacers on the car because the rims came off of an fd, when i say roll the fenders i mean just get rid of the sharp lip on the inner fender to keep a stock look to the fender.
|
^^^ nice, what are your plans for the car?
|
All times are GMT -5. The time now is 01:19 PM. |
© 2024 MH Sub I, LLC dba Internet Brands