Baseball Bat Fender Flaring?
#1
Full Member
Thread Starter
Join Date: Aug 2006
Location: Georgia
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
Baseball Bat Fender Flaring?
I remember a while back when I first joined I saw a few things on flaring your fenders by rolling it with a baseball bat. Any pics or walkthroughs on how to do this?
#4
i heart drag radials
Join Date: Mar 2006
Location: ye olde hampshire
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
yeap +1 wan, I also have done this method. Works phenomal, just do it gradually and you will be fine. I'll take pics if i have a chance.
works just as good as a fender roller if you are patient.
use a heat gun if you dont want paint cracking, i didn't even bother as I have some body work to do this winter anyways.
works just as good as a fender roller if you are patient.
use a heat gun if you dont want paint cracking, i didn't even bother as I have some body work to do this winter anyways.
Trending Topics
#9
I knw wht u did last sumr
Join Date: May 2006
Location: AZ
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
Fender Rolling Tool How-To:
http://www.mazda6tech.com/index.php?...id=17&Itemid=1
BLUE TII's Rolled Fender:
https://www.rx7club.com/showthread.p...t=roll+fenders
Pic are attached as they are no longer available in the thread.
http://www.mazda6tech.com/index.php?...id=17&Itemid=1
BLUE TII's Rolled Fender:
https://www.rx7club.com/showthread.p...t=roll+fenders
Pic are attached as they are no longer available in the thread.
#14
Yes its slow
iTrader: (7)
Join Date: Jan 2002
Location: usa
Posts: 2,455
Likes: 0
Received 0 Likes
on
0 Posts
Dude STFU you dont know what you're talking about. I'm guessing your conclusions came from your years of experience.
I wouldn't even be talking coming from a person with a bullshit ricer drop. Accomplish something and we'll talk.
I have never gotten any negative feedback from anyone about my rear fenders. Instead I get people asking how I did it.
I know you don't know something everyone else doesn't.
I wouldn't even be talking coming from a person with a bullshit ricer drop. Accomplish something and we'll talk.
I have never gotten any negative feedback from anyone about my rear fenders. Instead I get people asking how I did it.
I know you don't know something everyone else doesn't.
#15
Instead of wasting your time on useless bickering,how about a small how-to primer on correct fender rolling/pulling using a bat so some poor sole doesn't fu*k up their quarter panal ?
#16
Rotary Enthusiast
iTrader: (1)
Join Date: Apr 2007
Location: SAN JOSE
Posts: 1,155
Likes: 0
Received 0 Likes
on
0 Posts
yessir thats me with bull **** RICER DROP hahaha, i love it, how bout some pics of your **** BEFORE you did body work to correct that ****, yours looks good now, but before the body work???
#18
Yes its slow
iTrader: (7)
Join Date: Jan 2002
Location: usa
Posts: 2,455
Likes: 0
Received 0 Likes
on
0 Posts
I'm telling you....it takes TIME. Everyone that asks me..I tell them, the more time you take, the better results you will see.
You might have gotten the wrong impression of this method because of the shotty results you have seen. I have seen messed up fenders even from the Eastwood fender roller.
Half of the people doing this method have nothing to go by..trial and error is what they get. I have seen people do it before...just like some people mention. This is a gradual method..AKA it takes time.
You might have gotten the wrong impression of this method because of the shotty results you have seen. I have seen messed up fenders even from the Eastwood fender roller.
Half of the people doing this method have nothing to go by..trial and error is what they get. I have seen people do it before...just like some people mention. This is a gradual method..AKA it takes time.
#19
Rotary Enthusiast
iTrader: (1)
Join Date: Apr 2007
Location: SAN JOSE
Posts: 1,155
Likes: 0
Received 0 Likes
on
0 Posts
look how high your car is, doesnt need a ROLL, or a PULL, my car bieng as low as it is, was done with a body dolly, and only slightly rubs, when taking turns fast enough, what is so ricer about mine? suspenion is fine now, has enough travel for what i need, is your suspension so soft that you need all that space because of SAG?? not mine, so i dunno, to each his own
#20
Yes its slow
iTrader: (7)
Join Date: Jan 2002
Location: usa
Posts: 2,455
Likes: 0
Received 0 Likes
on
0 Posts
Well if you took observation between the pictures of now and then. Im running two different size and offset rear wheels.
I run a 17x10 +12 NOW..with 275/40 tire. With the fender pulled I dont rub. even lowered down
I run a 17x10 +12 NOW..with 275/40 tire. With the fender pulled I dont rub. even lowered down
#21
I knw wht u did last sumr
Join Date: May 2006
Location: AZ
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
#23
strike up the paean
step #1. heat the fender so its hot but not burning to the touch
step #2. grab something round of the appropriate diameter and jam it between the wheel and the fender
step #3. move the car slowly and guide the tool. it should roll with the car.
for a more aggressive roll/pull, step up to something bigger.
the end
http://www.youtube.com/watch?v=DDTK9IjKIYU
this video includes both the hammer the **** out of it method, and the roll it with a pipe/bat method
and people, please don't pull your fender just for the hell of it. a pulled fender on a car that doesn't need it screams 'i don't know wtf i am doing. i am a dumb ricer. please punch me in the face.' it's like widebody on a car with wheels that don't even fill the stock fenders.
Originally Posted by d-town
This is a gradual method..AKA it takes time.
Last edited by aznpoopy; 11-27-07 at 09:11 PM.
#24
Endure Persevere Succeed
iTrader: (30)
look how high your car is, doesnt need a ROLL, or a PULL, my car bieng as low as it is, was done with a body dolly, and only slightly rubs, when taking turns fast enough, what is so ricer about mine? suspenion is fine now, has enough travel for what i need, is your suspension so soft that you need all that space because of SAG?? not mine, so i dunno, to each his own
What BULLSHIT is this?
You're in San Jose? Drop the attitude and post pictures of your so-called car. Still rubbing after being done on a body dolly? Give me a break. If you're in San Jose, then meet up with me and we'll see if you can still talk ****.
Oh, and here's a pic of my car for you so you can't whine some more. Roll and pull front and rear fenders. 17x9 +22 RPF1s front and 17x10 +18 RPF1s.
#25
On the fasttrack!
iTrader: (22)
someone get rid of driftwerks, this guy is an idiot. goddamn!
and Jaiyurai, i just fell in love with your car, my friend in pitsburgh has a white fc, gp sport kit, perhaps you know him, jp is his name.
anywho, i love your car. just plain badass, lovin the enkei RPF-1's
peace
and Jaiyurai, i just fell in love with your car, my friend in pitsburgh has a white fc, gp sport kit, perhaps you know him, jp is his name.
anywho, i love your car. just plain badass, lovin the enkei RPF-1's
peace