Aftermarket JDM Cluster lots of Pics may be included
#33
re-amemiya body vert
iTrader: (2)
Join Date: Oct 2003
Location: Calgary, Canada
Posts: 503
Likes: 0
Received 0 Likes
on
0 Posts
I thought that was mentioned already? Naturally you're going to need a japanese/english person or company willing to help you out. RHDjapan.com comes to mind, so I would shoot them an e-mail.
#34
The Firestarter
Thread Starter
correct RHDjapan as contact with them, you may also get incontact with their USA supplier off ebay.
oh look this took 2 mins to find.
http://cgi.ebay.com/ebaymotors/JDM-M...Q5fAccessories
Seriously, regarding these gauges i have already answered all the questions previously in either my first post or around the first page.
About the Miata needles, they nearly weigh the same, the ones you want are from 96 model as their clear, the short needles on the miata are a bit shorter than the rx7 short needles, i dunno how much that will bug you, if i get a chance ill do a write up one of these days to swap in miata needles, but the best option is going with Cyberstork's needle film because its reflective and works well with LEDs.
**NEWS! THIS JUST IN**
Also, iv heard rumors from my special sources of another dash going to be built for JDM and USDM model S4 and S5 and S6. This is a full direct replacement cluster and does 360 sweep, which will go well with aftermarket gauges like DEFI AND it is said that this unit will have an idiot light board integrated into the cluster so you can delete the idiot light cluster on the dash to be freeed up for use. Cannot specify who will be making it at this time, but expect the price to be very hefty and probably not worth it unless it features datalogging compatibilities with most EMS. If it doesnt, your probably better off going with Stack.
oh look this took 2 mins to find.
http://cgi.ebay.com/ebaymotors/JDM-M...Q5fAccessories
Seriously, regarding these gauges i have already answered all the questions previously in either my first post or around the first page.
About the Miata needles, they nearly weigh the same, the ones you want are from 96 model as their clear, the short needles on the miata are a bit shorter than the rx7 short needles, i dunno how much that will bug you, if i get a chance ill do a write up one of these days to swap in miata needles, but the best option is going with Cyberstork's needle film because its reflective and works well with LEDs.
**NEWS! THIS JUST IN**
Also, iv heard rumors from my special sources of another dash going to be built for JDM and USDM model S4 and S5 and S6. This is a full direct replacement cluster and does 360 sweep, which will go well with aftermarket gauges like DEFI AND it is said that this unit will have an idiot light board integrated into the cluster so you can delete the idiot light cluster on the dash to be freeed up for use. Cannot specify who will be making it at this time, but expect the price to be very hefty and probably not worth it unless it features datalogging compatibilities with most EMS. If it doesnt, your probably better off going with Stack.
#35
re-amemiya body vert
iTrader: (2)
Join Date: Oct 2003
Location: Calgary, Canada
Posts: 503
Likes: 0
Received 0 Likes
on
0 Posts
About the Miata needles, they nearly weigh the same, the ones you want are from 96 model as their clear, the short needles on the miata are a bit shorter than the rx7 short needles, i dunno how much that will bug you, if i get a chance ill do a write up one of these days to swap in miata needles, but the best option is going with Cyberstork's needle film because its reflective and works well with LEDs.
**NEWS! THIS JUST IN**
Also, iv heard rumors from my special sources of another dash going to be built for JDM and USDM model S4 and S5 and S6. This is a full direct replacement cluster and does 360 sweep, which will go well with aftermarket gauges like DEFI AND it is said that this unit will have an idiot light board integrated into the cluster so you can delete the idiot light cluster on the dash to be freeed up for use. Cannot specify who will be making it at this time, but expect the price to be very hefty and probably not worth it unless it features datalogging compatibilities with most EMS. If it doesnt, your probably better off going with Stack.
The new cluster with full 360 sweep sounds pretty awesome, and something I've always wanted (as my other gauges sweep, self test) . But it doesn't actually exist though, still on the drawing board. If it's under 1000 it could sell, over and I don't think I'd do it. Thanks again.