Identify the mystery tmic
#1
Full Member
Thread Starter
Identify the mystery tmic
So, when I picked up my FC, this intercooler was in with a box of parts. There are no markings on it. It looks like a bracket was cut/ground off on the side. He has an FD, Maybe he had this in the wrong parts box? Looks like it would need a bracket at the least. Long shot, but I’d love to not go front mount just yet.
Its kind of beat up, not sure if it holds pressure, I’d have to test it. But, if it’s truly an improvement over my current top mount, I might try to get it hooked up.
#7
Full Member
Thread Starter
That’s what he said, but even if the bracket wasn’t cut off, it wouldn’t be in the right spot. I have looked up arc Intercoolers, but they generally look way different than this. Kind of flashy, while this one is exceedingly plain.
no markings whatsoever. I will think on it, maybe still worth trying, if it even holds pressure.
no markings whatsoever. I will think on it, maybe still worth trying, if it even holds pressure.
Trending Topics
#8
Have RX-7, will restore
iTrader: (91)
You can try it, but I'm not sure its designed as a top mount intercooler. The original intercooler would do a fair job until you start doing some mods. The stock units can heat soak and you can feel when they do. However, the hood scoop and seal ensure that the air that is fed to the intercooler is being fed efficiently and the seal prevents a lot of the air loss as air is fed to the intercooler via the hood scoop. Pretty decent setup on a stock or mostly stock TII.
Thread
Thread Starter
Forum
Replies
Last Post
KhanArtisT
2nd Generation Specific (1986-1992)
51
05-11-09 12:54 AM
Blk 93
3rd Generation Specific (1993-2002)
5
07-13-07 08:02 AM
karism
1st Generation Specific (1979-1985)
16
08-03-04 01:31 AM