RZMotorsports 3 rotor 831HP / 710 trq @ 27psi
#1
1000hp Quest
Thread Starter
RZMotorsports 3 rotor 831HP / 710 trq @ 27psi
#4
1000hp Quest
Thread Starter
Front end
the car had the front end on when I took it to dyno it's just that since it had to be strapped to the max it was lifting the front bumper and I decided to take it off before it rips it. But to answer your question is a cwest
#6
1000hp Quest
Thread Starter
#7
1000hp Quest
Thread Starter
Trending Topics
#11
1000hp Quest
Thread Starter
#13
1000hp Quest
Thread Starter
#17
1000hp Quest
Thread Starter
New toy just received
I just received the custom made shifter to move the shifter back so it can fit on the stock rx7 location, should receive new clutch on Monday
#18
Fuel System
Hi Mate,
can tell me about the fuel system you are using? i.e. are you using swirl pot, duel pump or a single 044 Bosch pump.
The information will be much appreciated.
Syed
mir_gillani@yahoo.com
can tell me about the fuel system you are using? i.e. are you using swirl pot, duel pump or a single 044 Bosch pump.
The information will be much appreciated.
Syed
mir_gillani@yahoo.com
#20
1000hp Quest
Thread Starter
Hi Mate,
can tell me about the fuel system you are using? i.e. are you using swirl pot, duel pump or a single 044 Bosch pump.
The information will be much appreciated.
Syed
mir_gillani@yahoo.com
can tell me about the fuel system you are using? i.e. are you using swirl pot, duel pump or a single 044 Bosch pump.
The information will be much appreciated.
Syed
mir_gillani@yahoo.com
I am running a in-tank duel pump set up.
#22
1000hp Quest
Thread Starter
I would like to say thank you to our new sponsor SPEC CLUTCHES
The T-56 kit is coming along. But first I would like to say thank you to our new sponsor SPEC CLUTCHES. Thank you for all your help creating this project a FD3s 3 disk carbon kit with T-56 magnum 26 spline hub.
More info to come...
More info to come...