Rx3SP 20B HP Project street car
#51
Rotary Enthusiast
you know i am usually not a big fan of old school , but damn if i gotta say it man , youre car is bad *** that`s something i would mind having in my garage...awesome work man , keep us updated
#52
Junior Member
iTrader: (1)
Join Date: May 2006
Location: So. Cal
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Well I drove the car home today and man It felt great.. I still can't get over how much torque a 20b has.. I can't wait til i break in the motor and really feel the power of a 20b.. I'm itching to feel the boost and to see how much power the motoor can produce at the wheels.. Hey Renee.. Thank you for building me a MONSTER OF A CAR!!! YOUR THE MAN!!!!
I can't wait to start the next project!!!!!!
I can't wait to start the next project!!!!!!
#53
Rotary Enthusiast
Thread Starter
Rx3 project
Thanks to all for your feedback, Jerry is a cool person to work with,he let
me basically do what i want in this project ,and it came out really good.Most
of the specs were all done with some experince and knowledge of the what
i have learned in the long run, but i have to say that is a sweet ride. I had alot of
fun driving it and can't wait to turn it up and hear that big turbo scream.
Here is the final picture of the project before it left home to the lucky owner.
me basically do what i want in this project ,and it came out really good.Most
of the specs were all done with some experince and knowledge of the what
i have learned in the long run, but i have to say that is a sweet ride. I had alot of
fun driving it and can't wait to turn it up and hear that big turbo scream.
Here is the final picture of the project before it left home to the lucky owner.
#56
ROT8IN' SINCE 1991
iTrader: (1)
Join Date: Oct 2006
Location: RotaryEmpire, Ca.
Posts: 786
Likes: 0
Received 0 Likes
on
0 Posts
Hey Rene, you've created a MONSTER Your work and quality is the futher-muckin isshhhhh dawg!!!
So, what's the total expense for the build? Do I have to take a "second" on my house? hehehe.
So, what's the total expense for the build? Do I have to take a "second" on my house? hehehe.
#58
Rotary Enthusiast
Thread Starter
Rx3 project
Yes it is a big street port.It is a port you can still drive on the street and have
plenty of power in the bottom end before the turbo start to kick in.We were debating
in the begining for a bridge port but told the owner it would be to radical on the
street with traffic(you know tipical LA).
plenty of power in the bottom end before the turbo start to kick in.We were debating
in the begining for a bridge port but told the owner it would be to radical on the
street with traffic(you know tipical LA).
#60
Rotary Enthusiast
Thread Starter
Rx3 project
The mufflers are 2 Magnaflow Race series 4" diameter IN/OUT.They sound
Really nice and Deep.Doesn't have the Resonance like a 2 rotor(Like a tin Can),
Must be the 3 rotor firing order also because the pulses cancel out each other so
it does not have the high pitch sound.But this is the best way to flow the exhaust
without any back pressure, especailly if you want to make lots of power.
Really nice and Deep.Doesn't have the Resonance like a 2 rotor(Like a tin Can),
Must be the 3 rotor firing order also because the pulses cancel out each other so
it does not have the high pitch sound.But this is the best way to flow the exhaust
without any back pressure, especailly if you want to make lots of power.
#61
Originally Posted by 61620B
The mufflers are 2 Magnaflow Race series 4" diameter IN/OUT.They sound
Really nice and Deep.Doesn't have the Resonance like a 2 rotor(Like a tin Can),
Must be the 3 rotor firing order also because the pulses cancel out each other so
it does not have the high pitch sound.But this is the best way to flow the exhaust
without any back pressure, especailly if you want to make lots of power.
Really nice and Deep.Doesn't have the Resonance like a 2 rotor(Like a tin Can),
Must be the 3 rotor firing order also because the pulses cancel out each other so
it does not have the high pitch sound.But this is the best way to flow the exhaust
without any back pressure, especailly if you want to make lots of power.
#70
Rotary Enthusiast
Thread Starter
damn i didnt know this threat was still up....its been a while.
The Rx3 was sold about 2 years ago to a person in Germany.
I still get props from this car even though its not here anymore...this was one of the cleanest Rx3 cars with a 20B that i have built.
I also built a 68 Datsun 510 with 20B daily driven on the streets with 500Rwhp on 12 psi boost.... insane sleeper.
The Rx3 was sold about 2 years ago to a person in Germany.
I still get props from this car even though its not here anymore...this was one of the cleanest Rx3 cars with a 20B that i have built.
I also built a 68 Datsun 510 with 20B daily driven on the streets with 500Rwhp on 12 psi boost.... insane sleeper.
#72
Rotary Enthusiast
Thread Starter
Here is my other recent cars that i own and built with 20B's......We go Racing at the Formula D series cross country at the moment ,FC Rx7 with Semi P port 3 Rotor and FD with Street port turbo....both cars well over 600 Rwhp on 15 psi boost
Kidneys and payments LOL
http://www.youtube.com/user/ReneMoto.../3/IChXs6U1Qlc
http://www.youtube.com/user/ReneMoto...22/y4W_XraVY2c
http://www.youtube.com/user/ReneMoto.../1/Fm5SmSAu5rw
Kidneys and payments LOL
http://www.youtube.com/user/ReneMoto.../3/IChXs6U1Qlc
http://www.youtube.com/user/ReneMoto...22/y4W_XraVY2c
http://www.youtube.com/user/ReneMoto.../1/Fm5SmSAu5rw
#74
Rotary Enthusiast
Thread Starter
here is a ride along the Rx7 FD 3 Rotor Doing some high speed drifting at the track this past 4th of July.....
http://www.youtube.com/profile?user=.../0/fZ3XeyL1k2c
ENJOY the music of the engine at 8000 RPM
http://www.youtube.com/profile?user=.../0/fZ3XeyL1k2c
ENJOY the music of the engine at 8000 RPM