Rx3SP 20B HP Project street car
#26
Rotary Enthusiast
Thread Starter
Rx3 project
I turned it over today with no igntion yet, just trying to prime the oil into
the engine . I am down to 3 wires on the wiring hope to start the engine up
before this thursday..
the engine . I am down to 3 wires on the wiring hope to start the engine up
before this thursday..
#31
Rotary Enthusiast
Thread Starter
Rx3 project
ITS ALIVE!!!! Man that sound was the best when it started right up.
I turned the key and it started like a champ.I let it run for 20 min and
no problems,no leaks or oil leaks like the mazdas do all the time just
a great moment of enjoing the sound.I cheated a little,couldn't wait
so i started the motor with no exhaust system just a big 4" down pipe.
I Reved the motor a couple times and whoaaa that tune was just on the
money.
I held on the pictures till the last moment, didn't want to spoil the last few
details to everyone.I will post up the new picture tomorrow WED 31, I will
test drive the Rx3 in the next few days until the weather settles a bit.
Videos will be posted soon, trying to upgrade my computer to download vidoes.
I turned the key and it started like a champ.I let it run for 20 min and
no problems,no leaks or oil leaks like the mazdas do all the time just
a great moment of enjoing the sound.I cheated a little,couldn't wait
so i started the motor with no exhaust system just a big 4" down pipe.
I Reved the motor a couple times and whoaaa that tune was just on the
money.
I held on the pictures till the last moment, didn't want to spoil the last few
details to everyone.I will post up the new picture tomorrow WED 31, I will
test drive the Rx3 in the next few days until the weather settles a bit.
Videos will be posted soon, trying to upgrade my computer to download vidoes.
#34
RX for fun
iTrader: (13)
Speaking of the devil. Jerry and I were just talking about putting miles on that new motor. So I will be breaking it in. I may drive it to Guitarjunkie's funeral on Saturday...thats about a lil over 100 miles round trip between LA and IE.
Originally Posted by 61620B
ITS ALIVE!!!! Man that sound was the best when it started right up.
I turned the key and it started like a champ.I let it run for 20 min and
no problems,no leaks or oil leaks like the mazdas do all the time just
a great moment of enjoing the sound.I cheated a little,couldn't wait
so i started the motor with no exhaust system just a big 4" down pipe.
I Reved the motor a couple times and whoaaa that tune was just on the
money.
I held on the pictures till the last moment, didn't want to spoil the last few
details to everyone.I will post up the new picture tomorrow WED 31, I will
test drive the Rx3 in the next few days until the weather settles a bit.
Videos will be posted soon, trying to upgrade my computer to download vidoes.
I turned the key and it started like a champ.I let it run for 20 min and
no problems,no leaks or oil leaks like the mazdas do all the time just
a great moment of enjoing the sound.I cheated a little,couldn't wait
so i started the motor with no exhaust system just a big 4" down pipe.
I Reved the motor a couple times and whoaaa that tune was just on the
money.
I held on the pictures till the last moment, didn't want to spoil the last few
details to everyone.I will post up the new picture tomorrow WED 31, I will
test drive the Rx3 in the next few days until the weather settles a bit.
Videos will be posted soon, trying to upgrade my computer to download vidoes.
Last edited by Siraniko; 01-31-07 at 03:17 PM.
#35
Rotary Enthusiast
Thread Starter
Rx3 project
OK everybody here it is ,the completed Mazda Rx3SP with 20B powerplant fully installed and running. Finished at last , 4 weeks in total time.
Here is the picture of the header before installation(Notice the extra support for the Big turbo).1st&2nd picture
Picture of the engine bay with turbo installed. 3rd picture
Picture of the 4" down pipe,Thats righ 4 " all the way. 4th picture
Picture of the turbo(Big turbo like i said)Its only 88MM ball bearing from
turbonetics the Y2K88MM turbo MID Frame turbo about 42 lbs.5th picture
Here is the picture of the header before installation(Notice the extra support for the Big turbo).1st&2nd picture
Picture of the engine bay with turbo installed. 3rd picture
Picture of the 4" down pipe,Thats righ 4 " all the way. 4th picture
Picture of the turbo(Big turbo like i said)Its only 88MM ball bearing from
turbonetics the Y2K88MM turbo MID Frame turbo about 42 lbs.5th picture
#37
Rotary Enthusiast
Thread Starter
Rx3 project
Here are some more picture of the Rx3Sp 20B engine,
Another view of the engine with all the parts in its place. 1st picture
More of the engine bay and turbo.2nd pic
Here you can see the bottom of the Rx3 with the intercooler all plumbed up. 3rd pic
The aluminum radiator with twin shrouded fans(let the engine run 30min an only got up to 170F with no air pushing up front,when fans come on it drops to 156F)4th pic
Picture of the 4" Muffler and the turndown i welded up.5th pic
You can see the experience on these shots,THERE WAS NO CUTTING ON THE FIREWALL or TRANNY TUNNEL,just a few holes for the 3" intercooler pipes.
See ya at the upcoming shows,Jerry will take the car to carshows really soon
and some Rx meets for closeup view.
Enjoy the pictures more to come,Hopefully some vidoes too.
Another view of the engine with all the parts in its place. 1st picture
More of the engine bay and turbo.2nd pic
Here you can see the bottom of the Rx3 with the intercooler all plumbed up. 3rd pic
The aluminum radiator with twin shrouded fans(let the engine run 30min an only got up to 170F with no air pushing up front,when fans come on it drops to 156F)4th pic
Picture of the 4" Muffler and the turndown i welded up.5th pic
You can see the experience on these shots,THERE WAS NO CUTTING ON THE FIREWALL or TRANNY TUNNEL,just a few holes for the 3" intercooler pipes.
See ya at the upcoming shows,Jerry will take the car to carshows really soon
and some Rx meets for closeup view.
Enjoy the pictures more to come,Hopefully some vidoes too.
Last edited by 61620B; 01-31-07 at 11:41 PM.
#42
Rotary Enthusiast
Thread Starter
Rx3 project
Me and Jerry(car owner) took the Rx3 for a spin today ,and you know
we had a big smiles all the way.We drove a bit without the hood on for a couple
of blocks on street , when we pulled up to the gas station we had people just
coming up and taking a good look at what the hell is that nice chrome stuff.
We filled it up and took it into the freeway,I of course had to be the first to
drive,couldn't let jerry drive it till it was safe.I meant safe from being throttle
happy,you know, you can't just unleash the power to someone who has been
itching to feel the awsome power of the 20B.He was just saying "damn that
sound is so different".I also told jerry he has to take it easy from now on
the Rx3 felt really nice and crisp on the freeway . Thanks to the awsome tuner
you know (Rene JR) got it all right in the first try.
Hope you people like it, i can do the same work (for all rotaries) If anyone is
interested(It has to be by appointment,for this work,I do one car at a
time to keep myself focused .More info of my shop PM me>
we had a big smiles all the way.We drove a bit without the hood on for a couple
of blocks on street , when we pulled up to the gas station we had people just
coming up and taking a good look at what the hell is that nice chrome stuff.
We filled it up and took it into the freeway,I of course had to be the first to
drive,couldn't let jerry drive it till it was safe.I meant safe from being throttle
happy,you know, you can't just unleash the power to someone who has been
itching to feel the awsome power of the 20B.He was just saying "damn that
sound is so different".I also told jerry he has to take it easy from now on
the Rx3 felt really nice and crisp on the freeway . Thanks to the awsome tuner
you know (Rene JR) got it all right in the first try.
Hope you people like it, i can do the same work (for all rotaries) If anyone is
interested(It has to be by appointment,for this work,I do one car at a
time to keep myself focused .More info of my shop PM me>
#45
Originally Posted by 61620B
Me and Jerry(car owner) took the Rx3 for a spin today ,and you know
we had a big smiles all the way.We drove a bit without the hood on for a couple
of blocks on street , when we pulled up to the gas station we had people just
coming up and taking a good look at what the hell is that nice chrome stuff.
We filled it up and took it into the freeway,I of course had to be the first to
drive,couldn't let jerry drive it till it was safe.I meant safe from being throttle
happy,you know, you can't just unleash the power to someone who has been
itching to feel the awsome power of the 20B.He was just saying "damn that
sound is so different".I also told jerry he has to take it easy from now on
the Rx3 felt really nice and crisp on the freeway . Thanks to the awsome tuner
you know (Rene JR) got it all right in the first try.
Hope you people like it, i can do the same work (for all rotaries) If anyone is
interested(It has to be by appointment,for this work,I do one car at a
time to keep myself focused .More info of my shop PM me>
we had a big smiles all the way.We drove a bit without the hood on for a couple
of blocks on street , when we pulled up to the gas station we had people just
coming up and taking a good look at what the hell is that nice chrome stuff.
We filled it up and took it into the freeway,I of course had to be the first to
drive,couldn't let jerry drive it till it was safe.I meant safe from being throttle
happy,you know, you can't just unleash the power to someone who has been
itching to feel the awsome power of the 20B.He was just saying "damn that
sound is so different".I also told jerry he has to take it easy from now on
the Rx3 felt really nice and crisp on the freeway . Thanks to the awsome tuner
you know (Rene JR) got it all right in the first try.
Hope you people like it, i can do the same work (for all rotaries) If anyone is
interested(It has to be by appointment,for this work,I do one car at a
time to keep myself focused .More info of my shop PM me>
Great job Rene, yeah jerry called me when you guys was driving around. Cant wait to see the car this week end and take it out for a spin, I'm sure its wilder than it looks.
#49
Junior Member
Join Date: Sep 2006
Location: San Francisco
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
I'm gonna have to grace my presents @ Wack's house this weekend to drive this car.
- Hey Wacky how far RU from Jerry's??
- Hey Wacky how far RU from Jerry's??
Last edited by Rotary-PU; 02-02-07 at 08:52 PM.