need sum info on the 20b
#1
Thread Starter
Join Date: Apr 2005
Location: Mcminnville, OR
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
need sum info on the 20b
1st of i'm going to be puting it in a 86
i need to know if i can get them in 5 or 6 speed
if not what transmission can i get to work on it
and about how much more Weight does it have when a 13b
ty guy for your help
i need to know if i can get them in 5 or 6 speed
if not what transmission can i get to work on it
and about how much more Weight does it have when a 13b
ty guy for your help
#2
Rotary Enthusiast
iTrader: (26)
Do you already have the engine?
They eunos cosmo 20b only came with an automatic from the factory.
A TII 5-speed from an RX7 will work unless you push too much torque through it.
I believe these questions have been asked and answered several time in the past. The search feature will help you get the answers to your questions without being flamed for asking newbie questions that have already been asked and answered.
PM me. I'm doing a 20b into an 87 and live in the same area code as you.
They eunos cosmo 20b only came with an automatic from the factory.
A TII 5-speed from an RX7 will work unless you push too much torque through it.
I believe these questions have been asked and answered several time in the past. The search feature will help you get the answers to your questions without being flamed for asking newbie questions that have already been asked and answered.
PM me. I'm doing a 20b into an 87 and live in the same area code as you.
#4
Thread Starter
Join Date: Apr 2005
Location: Mcminnville, OR
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
NNOOOOOOOOOO i like my GXL haaha
hmm ok were can i get a T2 for low ??
hoofhearted: we need to talk a lil
were do you get your parts from ?
hmm ok were can i get a T2 for low ??
hoofhearted: we need to talk a lil
were do you get your parts from ?
Last edited by Grim129; 06-27-05 at 01:52 AM.
#5
Start with a T2 drivetrain like was stated above unless you have access to the T2 stuff fairly cheap. You'll need axels, diff, driveshaft, and tranny. I would also put on the 4 pot brakes as well. Most of the stuff you'll need can be sourced from mazdatrix or racing beat. You'll need custom motor mounts to bolt it in. You can come across good deals on ebay every once in awhile.
-Destin
-Destin
Thread
Thread Starter
Forum
Replies
Last Post