Microtech 20B wont start
12-29-11, 06:37 PM
#1
FD3S 20B
Thread Starter
Join Date: May 2009
Location: Denmark
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Microtech 20B wont start
Okay so i know some of you is running a Microtech ecu so i hope for some help here.
the car ran fine with the stock cosmo ecu but now i have changed to single turbo and i am running a LTX-12s and i cant get my 20B to start with the settings on the ecu.
So can some of you share the data from your Microtech
i am running 850cc/1680cc injektors
i have tryed this thats for 720cc/1000cc injektors but with no luck http://uploading.com/files/33d4aecm/20b.rtf/
video; http://uploading.com/files/1dc894f4/GOPR0033.avi/
the car ran fine with the stock cosmo ecu but now i have changed to single turbo and i am running a LTX-12s and i cant get my 20B to start with the settings on the ecu.
So can some of you share the data from your Microtech
i am running 850cc/1680cc injektors
i have tryed this thats for 720cc/1000cc injektors but with no luck http://uploading.com/files/33d4aecm/20b.rtf/
video; http://uploading.com/files/1dc894f4/GOPR0033.avi/
Last edited by Mayhem85; 12-29-11 at 07:01 PM.
12-30-11, 09:02 PM
#2
FD3S 20B
Thread Starter
Join Date: May 2009
Location: Denmark
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
BUMP...
okay if you got a running 13B i can also use the data from that so please help
http://microtechefi.com/forum/viewtopic.php?f=9&t=66
okay if you got a running 13B i can also use the data from that so please help
http://microtechefi.com/forum/viewtopic.php?f=9&t=66
12-31-11, 10:18 AM
#4
FD3S 20B
Thread Starter
Join Date: May 2009
Location: Denmark
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
http://tinypic.com/player.php?v=riycg4&s=5
no it was from a 20b but with 550/1000cc injektors.
is it normal not to see any Timing signal while Cranking ? on what screen do i change the Timing advance ?
no it was from a 20b but with 550/1000cc injektors.
is it normal not to see any Timing signal while Cranking ? on what screen do i change the Timing advance ?
12-31-11, 02:54 PM
#5
FD3S 20B
Thread Starter
Join Date: May 2009
Location: Denmark
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
http://tinypic.com/player.php?v=riycg4&s=5
no it was from a 20b but with 550/1000cc injektors.
is it normal not to see any Timing signal while Cranking ? on what screen do i change the Timing advance ?
no it was from a 20b but with 550/1000cc injektors.
is it normal not to see any Timing signal while Cranking ? on what screen do i change the Timing advance ?
i tryed using some settings from a 13B with 720/1000cc injektors and diffrent timing numbers and now its really hard to idle, its getting 17 on my A/F wideband gage so i changed the idle map a little and now its ad 13 a/f ratio but still rough. and i forgot to save my old map to the dongle
with that map it was running fine ad idle and 11.x air/fuel, just woden start.Any people with some numbers for a 20B that i can try ?
Thread
Thread Starter
Forum
Replies
Last Post
