Hi all, long time reader first time poster ...

I have a 20B Cosmo and its ignition system is getting tired. I am going to get an aftermarket ignition system (no, im not interested in fixing my original) in anticipation of future mods.

I am running an E-Manage Ultimate so i don't want to go with the Microtech, but I want CDI ignition. I have seen another 20B running the HKS Twin power but cannot get any further details.

I am wondering if i run two HKS Twin Power DLI units to compensate for the extra rotor or is there another solution? (Will also be running after market coil packs, most likely MSD)

 

to see if it works, you need to know a little about the twin power.

if it does each channel of the 2 rotor separate, Leading, T1 and T2, then it might work on the cosmo, but be L1, L2 and L3

 

Why not run 2nd gen coilpacks? Those should be plenty sufficient and cheaper.

 

I was using the MSD stacker 8 which works in much the same way as the HKS unit, just use 6 of the 8 available inputs/outputs. Now using a M&W Pro-16 CDI unit with M&W coils.